EN
39
Indications During Playback
T
V
B
O
C
LUME
–
– – – –
–
–
1
6
S
:
–
P
2
–
3
–
:
–
4
4
A
–
5
T
+
2
6
3
1
4 5
1
Cassette Indicator
Displayed when a tape is loaded.
2
TBC Indicator ......................................
Z
pg. 29
3
Tape Counter .......................................
Z
pg. 29
4
Recording Mode Indicator (SP/EP) ........
Z
pg. 12
5
Tape Running Indicator
4
: Playback
3
: Fast-Forward/Shuttle Search
2
: Rewind/Shuttle Search
6
: Pause
6
Tracking Indicator ................................
Z
pg. 29
Warning Indications
Indications
Function
Displays the battery remaining power.
Remaining power level: high. It does not necessarily
mean that the battery pack is fully charged.
Remaining power level: exhausted
As the battery power comes close to nil, the battery indicator
blinks (battery
power warning).
When the battery power is exhausted, power turns off automatically.
Blinks when no cassette is loaded, or when the Erase Protection tab is not in the position
that allows recording.
(
Z
pg. 10)
Blinks for approx. 10 seconds when the power is turned on. This display also blinks when
the clock (lithium) battery is either not installed or has discharged. Install or replace the
old battery with a new one.
(
Z
pg. 10)
Appears when the tape ends during recording, playback or fast-forward.
(
Z
pg. 15)
Blinks for approx. 5 seconds when the camcorder is turned on with the lens cover closed.
(
Z
pg. 14)
These 2 warnings appear alternately every 3 seconds if condensation occurs. In this case,
all functions except tape eject and power on/off are disabled. Turn the unit off (without
removing the power supply), wait a few minutes for the warnings to clear, and turn it on
again.
These 2 warnings appear alternately every 3 seconds if dirt is detected on the heads
during recording. In this case, use an optional cleaning cassette. If the warning remains
after cleaning, consult your nearest JVC dealer.
The error indications (E01 — E06) show what type of malfunction has occured. If an
error indication and warning appear, turn the unit off, remove the power supply (battery,
etc.) and wait a few minutes for them to clear. When it does, you can resume using the
camcorder. If the indication remains, consult your nearest JVC dealer.
TAPE END
E01— E06
UNIT IN
SAFEGUARD MODE
REMOVE AND
REATTACH BATTERY
CONDENSATION
OPERATION PAUSED
PLEASE WAIT
LENS COVER
HEAD CLEANING
REQUIRED
USE CLEANING
CASSETTE
