JVC GR-AX657UM Скачать руководство пользователя | Manualshive

Страница: 9 / 60

background image

EN

9

GETTING ST

ARTED

Charge Marker

A charge marker is provided on the battery pack to
help you remember whether it has been charged or
not. Two colors are provided (red and black)—you
choose which one means charged and which means
discharged.

NOTES:

●

The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the
frequency of zooming. It is safer to have spare battery packs to cover 3 times the planned shooting time.

●

Charging times noted on page 8 are for a fully discharged battery pack, and discharging times are for a fully
charged battery pack.

●

Charging and discharging times vary according to the ambient temperature and the status of the battery pack.

●

Remember to set the charge marker after charging a battery pack or after detaching a discharged one from
your camcorder.

●

Perform the REFRESH function after no less than 5 chargings.

●

While the AC Power Adapter/Charger’s power cord is disconnected from the AC outlet, it is possible to
discharge the battery by pressing the REFRESH switch. During that time, the AC Power Adapter/Charger does
not charge the battery. When discharging is complete, detach the battery from the AC Power Adapter/
Charger to store it.

●

High temperatures can damage the battery pack, so use only where good ventilation is available. Do not
allow it to discharge in a container, such as a bag.

●

If you stop recharging or discharging part way through, make sure to remove the battery pack before
unplugging the adapter’s AC cord.

●

Remove the battery pack from the adapter immediately after discharging.

●

To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.

●

Make sure you unplug the DC cord before charging or discharging the battery pack.

●

The CHARGE indicator may not light properly with a brand new battery pack, or with one that has been
stored for an extended period. In this case, remove and reattach the battery pack and recharge it. The
CHARGE indicator should blink during recharging. If it doesn’t, contact your nearest JVC dealer.

USING AC POWER

Use the AC Power Adapter/Charger (connect as
shown in the illustration to the left).

NOTES:

●

The provided AC Power Adapter/Charger features
automatic voltage selection in the AC range from
110 V to 240 V.

●

When using the DC cord, make sure you connect
the end of the cord with the core filter to the
camcorder. The core filter reduces interference.

USING A CAR BATTERY

Use the optional Car Battery Cord or Car Battery
Charger/Adapter (connect as shown in the
illustration to the left).

NOTES:

●

When using the car battery, leave the engine
idling.

●

The optional Car Battery Charger/Adapter (BH-
V3U) can also be used to charge the battery pack
(except BN-V20U/V856U).

●

When using the optional Car Battery Charger/
Adapter or Car Battery Cord (AP-V7U), refer to the
respective instruction booklet.

To DC IN jack

DC OUT
terminal

To AC outlet

AC Power
Adapter/Charger
AA-V15U

DC Cord

To car’s
cigarette
lighter
socket

Car Battery Cord
AP-V7U (optional)

Charge marker

Car Battery
Charger/Adapter
BH-V3U (optional)

«
...
7
8
9
10
11
...
»

Содержание GR-AX657UM





























































Отзывы:

Нет отзывов

Похожие инструкции для GR-AX657UM

Бренд: Samsung Страницы: 4

Бренд: DEWESOFT Страницы: 59

Бренд: Telycam Страницы: 28

Бренд: Foxtech Страницы: 2

Бренд: Genius Страницы: 74

Osprey CAM/CCD-2KCL.TDI

Бренд: Fairchild Страницы: 30

Бренд: RED Страницы: 253

Бренд: Panasonic Страницы: 224

Бренд: Hitachi Страницы: 53

Бренд: Hitachi Страницы: 92

Бренд: Hitachi Страницы: 48

Бренд: Hitachi Страницы: 111

Бренд: Hitachi Страницы: 96

Бренд: Hitachi Страницы: 92

Бренд: Hitachi Страницы: 116

Бренд: Hitachi Страницы: 141

Бренд: Hitachi Страницы: 152

Бренд: Hitachi Страницы: 119

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды