JVC GM X50U, Инструкция по эксплуатации, Страница: 64 / 128

19
ENGLISH
P I C T U R E A D J .
S I Z E / P O S I T I O N A D J .
F U N C T I O N S E L E C T
S T A T U S D I S P L A Y
E N T E R :
M A I N M E N U
S E L E C T : E X I T :
M E N U
Adjusting the Color Temperature
The adjusted setting applies to all inputs.
1
Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
2
Press
5
/
∞
to move the cursor (
3
) to
“FUNCTION SELECT.”
3
Press
3
to display the Function
Selection Menu.
* 1
“ASPECT” does not appear when 720/60p, 720/50p,
1080/60i (1035/60i), or 1080/50i signal is being input
through the COMPONENT/RGB B input terminals.
*
2
“SIGNAL MODE” appears only when VIDEO
A, VIDEO B, or COMPONENT input is selected.
*
3
“SYNC TERM.” appears only when the RGB B
input is selected.
4
Press
5
/
∞
to move the cursor (
3
) to
“COLOR TEMP.”
5
Press
2
/
3
to make an adjustment.
Each time you press the button, the color temperature
alternates between “HIGH” and “LOW.”
HIGH : To make the screen become bluish.
LOW : To make the screen become reddish.
6
Press MENU/EXIT (or MENU on the
Monitor) twice to exit from the menu
operations.
Note:
• To make a fine adjustment, adjust “WHITE BALANCE” (see
page 25).
P I C T U R E A D J .
S I Z E / P O S I T I O N A D J .
F U N C T I O N S E L E C T
S T A T U S D I S P L A Y
E N T E R :
M A I N M E N U
S E L E C T : E X I T :
M E N U
Cursor (
3
)
“ * ” appears
only when you
have adjusted
the White
Balance (see
the right
column).
Changing the Aspect Ratio
The setting adjusted applies to all inputs.
• You can change the aspect ratio by pressing ASPECT. (See
page 15.)
1
Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
2
Press
5
/
∞
to move the cursor (
3
) to
“FUNCTION SELECT.”
3
Press
3
to display the Function
Selection Menu.
* 1
“ASPECT” does not appear when 720/60p, 720/50p,
1080/60i (1035/60i), or 1080/50i signal is being input
through the COMPONENT/RGB B input terminals.
*
2
“SIGNAL MODE” appears only when VIDEO
A, VIDEO B, or COMPONENT input is selected.
* 3
“SYNC TERM.” appears only when the RGB B
input is selected.
4
Press
5
/
∞
to move the cursor (
3
) to
“ASPECT.”
5
Press
2
/
3
to select an aspect ratio you
want.
Each time you press the button, the aspect ratio changes
as follows:
* For detailed information on these aspect ratios, see
page 15.
6
Press MENU/EXIT (or MENU on the
Monitor) twice to exit from the menu
operations.
Note:
• When one of the following signals is being input, you
cannot select the aspect ratio you want.
■
720/60p, 720/50p, 1080/60i (1035/60i), or 1080/50i signal
through the COMPONENT/RGB B input terminals
Aspect ratio is fixed to FULL (“ASPECT” does not appear
on the display).
■
When any signal other than RGB15K-60 and RGB15K-50
through the RGB A or COMPONENT/RGB B input terminals
You can select only REGULAR and FULL.
Cursor (
3
)
REGULAR FULL
ZOOM PANORAMIC
C O L O R T E M P .
A S P E C T
S I G N A L M O D E
C O M P O . / R G B B
S Y N C T E R M .
r e s e t
F U N C T I O N S E L E C T
A D J U S T : S E L E C T : E X I T :
M E N U
: H I G H
: P A N O R A M I C
: A U T O
: R G B B
: H I G H
*
*1 *2 *3
C O L O R T E M P .
A S P E C T
S I G N A L M O D E
C O M P O . / R G B B
S Y N C T E R M .
r e s e t
F U N C T I O N S E L E C T
A D J U S T : S E L E C T : E X I T :
M E N U
: H I G H
: P A N O R A M I C
: A U T O
: R G B B
: H I G H
*
*1 *2 *3
14-21_GM_X50E.p65 04.3.14, 3:30 PM 19