ENGLISH
17
SETTINGS
Category Menu items
Selectable settings, [reference page]
AUDIO
VOL ADJUST
Volume adjust
VOL ADJ –05 —
VOL ADJ +05
(Initial: VOL ADJ
00)
: Preset the volume adjustment level of each source (except
FM), compared to the FM volume level. The volume level
will automatically increase or decrease when you change
the source.
• Before making an adjustment, select the source you
want to adjust.
• “VOL ADJ FIX” appears on the display if “FM” is selected
as the source.
L/O MODE
Line output mode
•
SUB.W
•
REAR
: Select if the REAR LINE OUT terminals are used for
connecting a subwoofer (through an external amplifier).
: Select if the REAR LINE OUT terminals are used for
connecting the speakers (through an external amplifier).
SUB.W FREQ
*
9
Subwoofer cutoff
frequency
•
LOW
•
MID
•
HIGH
: Frequencies lower than 72 Hz are sent to the subwoofer.
: Frequencies lower than 111 Hz are sent to the subwoofer.
: Frequencies lower than 157 Hz are sent to the subwoofer.
SUB.W LEVEL
*
9
Subwoofer level
SUB.W 00
— SUB.W 08
: Adjust the subwoofer output level.
(Initial: SUB.W 04)
BEEP
Keypress tone
•
BEEP OFF
•
BEEP ON
: Deactivates the keypress tone.
: Activates the keypress tone.
TEL MUTING
Telephone
muting
•
MUTING 1/
MUTING 2
•
MUTING OFF
: Select either one which mutes the sounds while using a
cellular phone.
: Cancels.
AMP GAIN
*
10
Amplifier gain
control
•
LOW POWER
•
HIGH POWER
: VOLUME 00 – VOLUME 30 (Select if the maximum power
of each speaker is less than 50 W to prevent damaging the
speaker.)
: VOLUME 00 – VOLUME 50
SRC SELECT
AM
*
11
AM station
•
AM OFF
•
AM ON
: Disable “AM” in source selection.
: Enable “AM” in source selection, [4].
AUX IN
*
12
Auxiliary input
•
AUX OFF
•
AUX ON
: Disable “AUX IN” in source selection.
: Enable “AUX IN” in source selection, [4].
*
9
Displayed only when “
L/O MODE
” is set to “
SUB.W
.”
*
10
The volume level automatically changes to “VOLUME 30” if you change to “
LOW POWER
” with the volume level
set higher than “VOLUME 30.”
*
11
Displayed only when any source other than “AM” is selected.
*
12
Displayed only when any source other than “AUX IN” is selected.
EN16-19_KD-R407[EE]f.indd 17
EN16-19_KD-R407[EE]f.indd 17
10/8/08 5:55:47 PM
10/8/08 5:55:47 PM