7
ENGLISH
2
Press and hold
4
/
¢
(for
KS-FX473R/KS-FX470R) or
/
(for KS-F363R/KS-F360R) until “M
(manual)” starts flashing on the
display.
3
Tune into a station you want while “M”
is flashing.
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for FM
and 9 kHz intervals for AM – MW/LW) until
you release the button.
When an FM stereo broadcast is hard to
receive:
Press MO/RND (for KS-FX473R/KS-FX470R) or
MO (for KS-F363R/KS-F360R) while listening to
an FM stereo broadcast.
• Each time you press the button, the MO
indicator lights up and goes off alternately.
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved (the ST indicator goes
off).
To restore the stereo effect, press the same
button again.
Storing stations in memory
You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
• Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).
1
Select the FM band (FM1 – 3) you want
to store FM stations into.
2
Press and hold both buttons for more
than 2 seconds.
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2 or FM3).
These stations are preset in the number buttons —
No.1 (lowest frequency) to No.6 (highest frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned into.
“SSM” appears, then disappears when automatic
preset is over.
KS-F363R
KS-F360R
FM1
FM2
FM3
KS-FX473R
KS-FX470R
KS-F363R
KS-F360R
To tune into stations of lower frequencies.
KS-F363R
KS-F360R
KS-FX473R
KS-FX470R
Lights up when receiving an FM broadcast in stereo.
To tune into stations of higher frequencies.
KS-FX473R
KS-FX470R
KS-F363R
KS-F360R
KS-FX473R
KS-FX470R
EN06-08.KS-FX473[E]f
10/19/01, 9:00 PM
7