background image

 

- 3 - 

 

 

 

 

1.  Read all of these instructions. 

2.  Save these instructions for later use. 

3.  Follow all warnings and instructions marked on the product. 

4.  Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a 

damp cloth for cleaning. 

5.  Do not use this product near water. 

6.  Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to 

the product and persons nearby. 

7.  Slots and openings in the cabinet and the back are provided for ventilation: to ensure reliable operation of the 

product, these openings must not be blocked by placing the product on a bed, sofa, rug or other similar surface.   

This product should never be placed near or over a heat register. This product should not be placed in a built-in 

installation unless proper ventilation is provided. 

8.  This product should be operated from the type of power source indicated on the marking label. If you are not 

sure of the type of power available, consult your dealer or local power company. 

9.  This product is equipped with a 3-wire grounding type plug having a third (grounding) pin. This is a safety 

feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete 

outlet. Do not defeat the purpose of the grounding-type plug. 

10.  Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. 

11.  If an extension cord is used with this product, make sure that the total of the ampere ratings on the products 

plugged into the extension cord do not exceed the extension cord ampere rating. Also, make sure that the total 

of all products plugged into the wall outlet does not exceed 10 amperes. 

12.  Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage 

points or short out parts that could result in a risk of fire or electric shock. Never spill any kind of liquid on the 

product. 

13.  Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous 

voltage points or other risks. Refer all servicing to service personnel. 

14.  Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following 

conditions. 

A.  When the power cord or plug is damaged or frayed. 

B.  If liquid has been spilled into the product. 

C.  If the product has been exposed to rain or water. 

D.  If the Product does not operate normally when the operating instructions are followed.   

Adjust only those controls that are covered by the operating instructions since improper adjustment of other 

controls may result in damage and will often require extensive work by a qualified technician to restore 

normal operation. 

E.  If the product has been dropped or the cabinet has been damaged. 

 

 

SAFETY INSTRUTIONS 

Содержание GD-171

















Отзывы: