JVC GC-X3, Инструкция по эксплуатации

Страница: 30 / 96

30
EN
Full Auto Shooting
This mode allows you to take photos with little effort, since the camera automatically adjusts the focus, the
shutter speed, the brightness and the white balance.
Shutter button
1
Turn the Power dial to “
A
”.
•Hold the Lock button down while turning
the Power dial.
•The camera turns on in full auto mode.
2
Point the lens at the subject, position
yourself, and half-press the Shutter button.
•Look through the finder.
•The camera will automatically focus on the
subject while the shutter button is half-
pressed.
•The shoot standby lamp (green) flashes.
Once focus is attained, the lamp changes
from flashing to on.
•To display the image on the LCD screen
while shooting, press the DISPLAY button.
3
Press the Shutter button all the way to take
the picture.
•The picture image is stored in the Memory
card.
•The shoot standby lamp (green) goes off
when the recording has finished.
NOTES:
●
The image on the LCD screen becomes still while
the shoot standby lamp (green) flashes.
●
It takes a little while to store the picture in the
Memory card.
OFF
M
4
SET
V
Power dial
Lock button
BASIC OPERATION (cont.)
Shoot standby
lamp (green)