manualshive.com logo in svg

JVC FS-A52, Руководство по обслуживанию

Поделиться
Скачать
JVC FS-A52 Скачать руководство пользователя страница 24

1-24

FS-A52

Prior to performing the following procedure, remove 
the side bracket (L), (R), cassette hanger assembly / 
cassette holder.

Remove the spring on the lower side of the head 
assembly.

Remove the two screws 

D

  and remove the head 

assembly upward.

Remove the screw 

E

  attaching the head board. 

Unsolder the flexible wire extending from the head 
assembly if necessary.

1.

2.

3.

Removing the head assembly / head 
board (See Fig.9 and 10)

Prior to performing the following procedure, remove 
the side bracket (L), (R), cassette hanger assembly / 
cassette holder.

Remove the belt and sub belt on the bottom of the 
body.

Remove the polywasher from the flywheel (F) and 
(R) on top of the body.

Pull out the flywheel (F) and (R).

1.

2.

3.

Removing the flywheel assembly (F) and 
(R) (See Fig.11 and 12)

Fig.9

Fig.10

Fig.11

Head assembly

D

D

Fig.12

E

Head assembly

Head board

Soldering

Belt

Sub belt

Flywheel assembly (R)

Flywheel assembly (F)

Polywasher

Polywasher

Содержание FS-A52



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды