1-24 (No.MA161)
3.2.10 Removing the DVD pickup assembly
(See Figs.18 to 20)
• Remove the mechanism control board.
(1) From the bottom of the body, turn the feed gear in the di-
rection of the arrow to move the DVD pickup outwards.
(See Fig.18)
(2) Remove the screw
J
attaching the thrust spring. (See
Fig.18)
(3) Remove the DVD pickup assembly upward on the L.S.gear
side and release from sub shaft at joint
s
Move the lead
screw of the DVD pickup assembly in the direction of the
arrow to release from joint
t
. (See Fig.19)
Caution:
• When releasing the lead screw at joint
t
, the L.S.collar
comes off at the end of the lead screw.
When reassembling, reattach the L.S.collar to the lead
screw and engage joint
t
. (See Fig.19)
• When reattaching the L.S.collar, reattach it to the point
s of the lead screw, and to the rod (M).
Make sure that the L.S.collar is set on the rod (M)
spring. (See Fig.19)
(4) Remove the screw
K
attaching the rack spring and rack
plate on the DVD pickup. (See Fig.20)
(5) Pull out the lead screw. (See Fig.20)
Caution:
Perform adjustment after replacing the pickup.
Fig.18
Fig.19
Fig.20
J
Feed gear
Thrust spring
DVD Pickup assembly
t
s
L.S.collar
Rod(M)
L.S.gear
Lead screw
Sub shaft
DVD Pickup assembly
K
Rack spring
Rack plate
L.S.collar
DVD Pickup
Lead screw