1-10 (No.MB658<Rev.001>)
3.1.7 Removing the Main board (See Fig.12 to 14)
(1) Disconnect the card wire from Micon board connected to
connector
CN202
of the Main board. (See Fig.12)
(2) Disconnect the card wire from DVD mechanism connected
to connector
CN206
of the Main board. (See Fig.12)
(3) Disconnect the connector wires from Main board connect-
ed to connector
CN102
and
CN103
of the Digital amp
board. (See Fig.12)
(4) Remove the three screws
S
attaching the Main board. (See
Fig.12)
(5) Disconnect the connector wires from Main board connect-
ed to connector
CN713
and
CN714
of the Micon board.
(See Fig.13)
(6) Disconnect the Earth wire from bottom chassis connected
to test point
TP201
and
TP204
of the Main board. (See
Fig.14)
Fig.12
Fig.13
Fig.14
S
S
S
CN102
CN202
CN206
CN103
CN713
CN714
TP201
TP204
