Reducing Camera Shake
When the image stabilizer is set, camera shake during video recording can
be effectively reduced.
1
Open the LCD monitor.
.
2
Press the
a
button to change the setting.
.
0
The setting of image stabilizer changes with every press.
Setting
Details
b
OFF
Deactivates image stabilizer.
a
ON
Reduces camera shake under normal shooting
conditions.
r
ON (AIS)
Reduces camera shake more effectively when
shooting bright scenes on the wide angle end.
Only on the wide angle end (approx. 5x).
(
A
video mode only)
Memo :
0
It is recommended to set the image stabilizer to “OFF” when shooting a
subject of little movement with the unit on a tripod.
0
Complete stabilization may not be possible if camera shake is excessive.
0
When “ON (AIS)” is set, the angle of view becomes narrower.
0
Image stabilization only starts when the SNAPSHOT button is pressed
halfway during still image recording.
Recording at Intervals (TIME-LAPSE
RECORDING)
Enables the changes of a scene that occur slowly over a long period to be
shown within a short time by taking frames of it at a certain interval.
This is useful for making observations such as the opening of a flower bud.
1
Open the LCD monitor.
.
0
Check if the recording mode is
A
.
0
If the mode is
B
still image, tap
B
on the recording screen to display
the mode switching screen.
Tap
A
to switch the mode to video. (You can also use the
A
/
B
button
on this unit.)
2
Tap “MENU”.
.
REC
≪
PLAY
MENU
0
The shortcut menu appears.
3
Tap “MENU” in the shortcut menu.
.
MENU
4
Tap “TIME-LAPSE RECORDING”.
.
TIME-LAPSE RECORDING
VIDEO
0
Tap
3
or
2
to move upward or downward for more selection.
0
Tap
L
to exit the menu.
0
Tap
J
to return to the previous screen.
5
Tap to select a recording interval (1 to 80 seconds).
.
5SEC INTERVAL
2SEC INTERVAL
1SEC INTERVAL
OFF
TIME-LAPSE RECORDING
0
The greater the number of seconds, the longer the recording interval.
0
Tap
3
or
2
to move upward or downward for more selection.
0
Tap
L
to exit the menu.
0
Tap
J
to return to the previous screen.
Recording
50