8
EN
Master Page: Left
GR-DVP7-5EG_02-08.fmPage 8
Automatic Demonstration
Automatic Demonstration takes place when “DEMO
MODE” is set to “ON” (factory-preset).
䡲
Automatic Demonstration starts when there is no
operation for about 3 minutes after the Power Switch is
set to “
A
” or “
M
” and no cassette is in the camcorder.
䡲
Performing any operation during the demonstration
stops the demonstration temporarily. If no operation is
performed for more than 3 minute after that, the
demonstration will resume.
䡲
“DEMO MODE” remains “ON” even if the camcorder
power is turned off.
䡲
To cancel Automatic Demonstration:
1)
Set the Power Switch to “
M
” while pressing down the
Lock Button located on the switch.
2)
Open the LCD monitor fully, or pull out the viewfinder
fully.
3)
Press
MENU
. The Menu Screen appears.
4)
Press
+
or
–
to select “
s
SYSTEM”, and press
SET/
SELECT
. The SYSTEM Menu appears.
5)
Press
+
or
–
to select “DEMO MODE”, and press
SET/
SELECT
. The Sub Menu appears.
6)
Press
+
or
–
to select “OFF”, and press
SET/SELECT
.
7)
Press
+
or
–
to select “
B
RETURN”, and press
SET/
SELECT
twice. The normal screen appears.
NOTE:
Slide the lens cover down to see the actual changes of the
Automatic Demonstration activated on the LCD monitor
or viewfinder.
MODE
DEMO
–
ON
OF F
Power Switch
Lock Button
MENU Button
Sub Menu
SET/SELECT Button
+, – Button
GR-DVP7-5EG_02-08.book Page 8 Thursday, February 28, 2002 11:39 AM
