58
EN
Master Page: Left
GR-DVP7-5EG_37-79.fm
Page 58
The Navigation Function helps you check tape
contents by making thumbnail images on a memory
card.
To make thumbnail images during tape
recording
1
Load a cassette. (
墌
pg. 16)
2
Load a memory card. (
墌
pg. 17)
3
Set the
VIDEO/MEMORY
switch to “VIDEO”.
4
Set the Power Switch to “
A
” or “
M
” while
pressing down the Lock Button located on the
switch.
5
Set “NAVIGATION” to the desired navigation
storing time. (
墌
pg. 38, 47)
●
The “
” appears blinking on the screen.
Wait until it stops blinking. If it does not stop
blinking after a while, check if a memory card
is loaded.
6
Press the Recording
Start/Stop Button to
start tape recording.
The image of the point
where recording is
started is captured.
●
If the Recording
Start/Stop button is
pressed before
“
” stops
blinking, the image
of the point where the loaded memory card is
recognised is captured.
●
If the recording time is over the navigation time
set in step
5
, “
” appears briefly and the
captured image is stored in the memory card as
a thumbnail image.
7
Press the Recording Start/Stop Button to stop tape
recording.
NOTES:
●
The remaining number of storable thumbnail
images also appears on the screen when it reaches
10 or less. If “REC SELECT”is set to “
/
”
in DSC Menu, the number shows how many
640 x 480 pixel images can be stored.
●
If “5S” is set to “5S” or “Anim.” in MANUAL
menu, the NAVIGATION function will not work
properly.
To find scenes on tape using thumbnail images
(NAVIGATION Search)
1
Load a cassette. (
墌
pg. 16)
2
Load a memory card. (
墌
pg. 17)
3
Set the
VIDEO/MEMORY
switch to “VIDEO”.
4
Set the Power Switch to “
P
” while pressing
down the Lock Button located on the switch.
5
Press
NAVI
during video playback or stop mode.
●
The loaded cassette’s
NAVIGATION
thumbnail image
screen appears.
●
Turn the
SHUTTLE
SEARCH
Ring to the
left (
3
) to display
the previous page.
Turn the
SHUTTLE SEARCH
Ring to the right
(
5
) to display the next page.
6
Press
+
or
–
to select the desired image, and press
SET/SELECT
.
●
The “NAVIGATION SEARCH” indication
appears blinking and the camcorder starts
searching the tape for the relevant point of the
selected thumbnail image.
To cancel NAVIGATION search midway...
Press
4
/
9
or
8
, or turn the
SHUTTLE SEARCH
Ring
to the left (
3
) or to the right (
5
).
CAUTION:
Do not remove the memory card or perform any
other operation (such as turning off the camcorder)
during deletion. Also, be sure to use the provided
AC Power Adapter/Charger, as the memory card may
be corrupted if the battery becomes exhausted
during deletion. If the memory card becomes
corrupted, initialise it.
NAVIGATION Function
Power Switch
MENU
Button
SNAPSHOT Button
VIDEO/MEMORY Switch
Lock Button
NAVI Button
P
L
0
1 min
min
0
PAUSE
PAUSE
P
L
0
1 min
0
PAUSE
Displayed while the
captured image is being
stored in the memory
card.
TC
: 1 3 : 2 3 : 1 5
3
5
2
.
4
DATE : 2
:
’
3
0
:
2
2 9
ON
I
T
NAV I GA
1
2
3
4
5
006
FEATURES FOR RECORDING (cont.)
GR-DVP7-5EG_02-08.book Page 58 Thursday, February 28, 2002 11:39 AM
