8
EN
MODE
DEMO
–
ON
OF F
AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place
when “DEMO MODE” is set to “ON”
(factory-preset).
䡲
Available when the Power Switch is set to
“
” or “
” and no cassette is in the
camcorder.
䡲
Performing any operation during the demon-
stration stops the demonstration temporarily. If
no operation is performed for more than 1
minute after that, the demonstration will
resume.
䡲
“DEMO MODE” remains “ON” even if the
camcorder power is turned off.
䡲
To cancel Automatic Demonstration:
1.
Set the Power Switch to “
” while
pressing down the Lock Button located on
the switch and press
MENU
. The Menu
Screen appears.
2.
Press
+
or
–
to select “
SYSTEM” and
press
SET/SELECT
. The SYSTEM Menu
appears.
3.
Press
+
or
–
to select “DEMO MODE” and
press
SET/SELECT
. The Sub Menu appears.
4.
Press
+
or
–
to select “OFF” and press
SET/
SELECT
.
5.
Press
+
or
–
to select “ RETURN”, and
press
SET/SELECT
twice. The normal screen
appears.
NOTE:
If you do not slide the lens cover down, you
cannot see the actual changes of the Automatic
Demonstration activated on the LCD monitor or
viewfinder.
Sub Menu
Lock Button
MENU Button
Power Switch
+, – Button
SET/SELECT Button
Lens Cover
Slide down the lens cover
while pressing down the
Lock Button located on the
cover.
Slide up the lens cover to
protect the lens when the
camcorder is not in use.
NOTE:
When sliding down the lens
cover, be sure not to touch
the lens.
Lens Cover
Lock Button
