JVC DVM96U - Camcorder - 1.0 Megapixel Скачать руководство пользователя

Страница: 53 / 104

Master Page: Right-Heading0

GR-DVM96-76U_37-79.fm

Page 53

FEATURES FOR RECORDING

Makes dark subjects or areas even brighter than they
would be under good natural lighting. Although the
recorded image is not grainy, it may look as if it is
strobing due to the slow shutter speed.

Set the Power Switch to “

” while pressing down

the Lock Button located on the switch.

Open the LCD monitor fully or pull out the
viewfinder fully.

Press

NIGHT

so that the Night-Alive indicator

“

” appears.

●

The shutter speed is automatically adjusted to
provide up to 30 times sensitivity.

●

“ ” appears beside “

” while the shutter

speed is being automatically adjusted.

To deactivate Night-Alive…

Press

NIGHT

again so that the Night-Alive indicator

disappears.

NOTES:

●

During Night-Alive, the following functions or
settings cannot be activated and its indicator
blinks or goes out:
• Some modes of “Program AE With Special

Effects” (

墌

pg. 42).

• “Snapshot Flash” (

墌

pg. 54).

• “GAIN UP” in CAMERA Menu. (

墌

pg. 45)

• “DIS” in MANUAL Menu. (

墌

pg. 46)

●

During Night-Alive, it may be difficult to bring the
camcorder into focus. To prevent this, use of a
tripod is recommended.

This feature lets you record still images that look like
photographs onto a tape.

Set the

VIDEO/MEMORY

Switch to “VIDEO”.

Set the Power Switch to “

” while pressing down

the Lock Button located on the switch.

Open the LCD monitor fully, or pull out the
viewfinder fully.

Set “SNAP MODE” to the desired mode.
(

墌

pg. 38, 45)

Press

SNAPSHOT

●

The “

” indication appears and a still

image will be recorded for approx. 6 seconds,
then the camcorder re-enters the Record-
Standby mode.

●

You can perform Snapshot also during
recording. A still image will be recorded for
approx. 6 seconds, then the normal recording
resumes.

●

Regardless of the Power Switch position (“

”

or “

”), Snapshot recording takes place using

the selected Snapshot mode.

NOTES:

●

To remove the shutter sound, refer to “BEEP” on
page 48.

●

If Snapshot recording is not possible, the “

”

indication blinks when

SNAPSHOT

is pressed.

●

If Program AE with special effects (

墌

pg. 42) is

engaged, certain modes of Program AE with
special effects are disabled during Snapshot
recording. In such a case, the icon blinks.

●

SNAPSHOT

is pressed when “DIS” is set to

“ON” (

墌

pg. 46), the Stabilizer will be disabled.

●

During playback as well, all snapshot modes are
available when “

COPY” is set to “OFF”

in VIDEO Menu. (

墌

pg. 51) However, the shutter

sound is not heard.

●

During Snapshot recording, the image displayed
in the viewfinder may be partially missing.
However, there is no effect in the recorded image.

●

When a cable is connected to the AV connector,
the shutter sound is not heard from the speaker,
however it is recorded onto the tape.

Motor Drive Mode

Keeping

SNAPSHOT

pressed in step

provides an

effect similar to serial photography. (Interval
between still images: approx. 1 second)

●

The Motor Drive mode is disabled when “REC
SELECT” is set to “

”. (

墌

pg. 38, 50)

Night-Alive

OFF

PLA

Power Switch

Lock Button

VIDEO/MEMORY
Switch

MENU Wheel

NIGHT Button

SNAPSHOT Button

Snapshot (For Video Recording)

GR-DVM96-76U_37-79.fm Page 53 Friday, February 15, 2002 11:55 AM

Содержание DVM96U - Camcorder - 1.0 Megapixel








































































































Результаты поиска

Содержание DVM96U - Camcorder - 1.0 Megapixel

Отзывы:

Похожие инструкции для DVM96U - Camcorder - 1.0 Megapixel

Бренды по названию

Популярные бренды

JVC DVM96U - Camcorder - 1.0 Megapixel, Инструкция по эксплуатации

Результаты поиска

Содержание DVM96U - Camcorder - 1.0 Megapixel

Отзывы:

Похожие инструкции для DVM96U - Camcorder - 1.0 Megapixel

Бренды по названию

Популярные бренды