48
Computer signals (preset)
Analog RGB input (COMP./RGB terminals) and DVI input (HDMI terminal):
No.
Signal name
Resolution Frequency
Scan system
Horizontal
Vertical
Horizontal (kHz)
Vertical (Hz)
1
VGA60
640
480
31.5 59.9 Non-interlace
2
WVGA60
852
480
31.5 59.9 Non-interlace
3
SVGA60
800
600
37.9 60.3 Non-interlace
4
XGA60
1024
768
48.4 60.0 Non-interlace
5
WXGA (1280)
1280
768
47.8
60.0
Non-interlace
6
WXGA+60 *
1
1440
900
55.9 60.0 Non-interlace
7
SXGA60 *
1
1280
1024
64.0 60.0 Non-interlace
8
UXGA60 *
1
1600
1200
75.0 60.0 Non-interlace
9
WUXGA60 *
1
1920
1200
74.0 60.0 Non-interlace
10
1080/60p *
1
1920
1080
67.5 60.0 Non-interlace
11
1080/50p *
1
1920
1080
56.3 50.0 Non-interlace
12
US TEXT *
2,
*
5
720
400
31.5 70.1 Non-interlace
13
WXGA(1360)
1360
768
47.7 60.0 Non-interlace
14
SXGA+/60A *
1,
*
3
1400
1050
64.0 60.0 Non-interlace
15
SXGA+/60B *
1,
*
4
1400
1050
65.2 60.0 Non-interlace
16
MAC13
*
5
640
480
35.0 66.7 Non-interlace
17
MAC16
*
5
832
624
49.7 74.5 Non-interlace
18
MAC19
*
5
1024
768
60.2 74.9 Non-interlace
19
MAC21
*
5
1152
870
68.7 75.1 Non-interlace
*
1
No. 6, 7, 8, 9, 10, 11, 14 and No. 15 signals come in, thin lines will become obscured because their signal resolution is higher than the screen resolution.
*
2
The signal is recognized as VGA400/70, and the status is displayed as “VGA400/70”.
*
3
The signal is recognized as SXGA+60, and the status is displayed as “SXGA+60”.
*
4
The signal is recognized as SXGA+60*, and the status is displayed as “SXGA+60*”.
*
5
Only supports analog RGB input.
●
Non-preset signals may not be displayed normally even if the frequency is within the acceptable range.
●
When a preset signal comes in, the signal format is shown on the status display. When a non-preset signal comes in, “Out Of Range” appears.
Specification of the HDMI terminal
Connect it to the HDMI output terminal of a video device.
1
19
2
18
Pin No.
Input signal
Pin No.
Input signal
Pin No.
Input signal
1
T.M.D.S Data 2+
8
T.M.D.S Data 0 shield
15
SCL
2
T.M.D.S Data 2 shield
9
T.M.D.S Data 0–
16
SDA
3
T.M.D.S Data 2–
10
T.M.D.S Clock+
17
DDC/CEC GND
4
T.M.D.S Data 1+
11
T.M.D.S Clock shield
18
+5 V Power
5
T.M.D.S Data 1 shield
12
T.M.D.S Clock–
19
Hot Plug Detect
6
T.M.D.S Data 1–
13
Spare (not connected)
7
T.M.D.S Data 0+
14
Spare (not connected)
Specification of the mini D-SUB15pin terminal
Connect it to the mini D-SUB15pin output terminal of a video device.
Notice on transportation
This monitor is precision equipment and needs dedicated packing material for transportation.
Never use any packing material supplied from sources other than JVC or JVC-authorized dealers.
●
For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be slightly different
from actual products.
●
Design and specifications are subject to change without notice.
●
All company names and product names mentioned herein are used for identification purposes only, and may be the trademarks or
registered trademarks of their respective companies.
Pin No.
Input signal
1
Red video signal
2
Green video signal
3
Blue video signal
4
Not connected
5
Ground
6
Red video signal return
Pin No.
Input signal
7
Green video signal return
8
Blue video signal return
9
Not connected
10
Ground
11
Not connected
12
I2C data
Pin No.
Input signal
13
Horizontal synchronization
signal
14
Vertical synchronization signal
15
I2C clock
Specifications (cont.)
DT-E15L4̲EN.indb 48
DT-E15L4̲EN.indb 48
2012/11/01 17:10:53
2012/11/01 17:10:53
