Filename [MV5SEK_09Advanced Operation.fm]
Masterpage:Left+
48
EN
ADVANCED PLAYBACK
Page 48Wednesday, 31 August 2005 19:58
Still Picture/Frame-By-Frame Playback
1
Press
9
to pause during playback.
2
Press
9
repeatedly to activate frame-by-frame playback.
●
Each press of
w
or
e
advances/reverses the still picture frame by
frame.
●
Frame-by-frame playback for reverse direction cannot be performed
with Video CD discs.
●
To resume normal playback, press
4
.
Slow Motion
1
Press
9
to pause during playback.
2
Press
SLOW –
(
3
) or
SLOW +
(
5
).
●
Each press of
SLOW –
(
3
) or
SLOW +
(
5
) increases the slow
motion speed for each direction (from 1/16 to 1/2 times the normal
speed).
●
Slow motion for reverse direction cannot be performed with Video CD
discs.
Skip Search
During playback, press
.
●
Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
Resume Function
It is possible to memorise the position where you stop playback
and resume playback from that position.
●
Be sure to set “RESUME” to “ON” or “DISC RESUME”. (
墌
pg. 80)
1
Press
8
during playback to memorise a resume point.
●
The unit enters Resume Stop mode and memorises the position
where you have stopped playback as a resume point. (The inside of
the disc status indicator on the front display panel blinks while
memorising.)
●
The unit retains a memory of the resume points of the last 30 discs
played back, even though they have been ejected if “RESUME” is set
to “DISC RESUME”. (
墌
pg. 80)
●
To clear the resume points:
(The inside of the disc status indicator stops blinking and lights.)
When “RESUME” is set to “ON”:
• Press
1
to turn off the unit.
• Press
x
(OPEN/CLOSE)
to take out the disc.
• Press
8
in stop mode.
• Press
TOP MENU
to display the top menu, then start playback by
selecting an item, etc.
• Press
MENU
to display the disc menu, then start playback by selecting
an item, etc.
When “RESUME” is set to “DISC RESUME”:
• Set “RESUME” to “OFF”. (
墌
pg. 80)
• Press
8
in stop mode.
• Press
TOP MENU
to display the top menu, then start playback by
selecting an item, etc.
• Press
MENU
to display the disc menu, then start playback by selecting
an item, etc.
2
Press
4
in stop mode to resume playback. The unit starts
playback from the resume point.
NOTES:
●
“DISC RESUME” setting works on DVD VIDEO, VCD and already
finalised DVD-R/DVD-RW (video mode) discs. For other types of
discs, the function under “ON” setting will be applied even if
“RESUME” is set to “DISC RESUME”. (
墌
pg. 80)
●
If you stop the playback of a disc for which a resume point has
already been memorised, the memory will be updated with the new
resume point.
●
After the unit has memorised the resume points for 30 discs,
remembering a new resume point will cause the unit to delete the
oldest memorised point. Stopping playback of a disc for which a
resume point is already stored may change the order in which the
points are stored. This may potentially change the order in which
points are deleted.
●
When the unit memorises a resume point for a disc, it also
remembers audio language, subtitle and angle settings.
●
This function may not work for some Video CDs.
●
When “RESUME” is changed to “ON” or “OFF” (
墌
pg. 80), resume
points of the discs memorised with “RESUME” set to “DISC
RESUME” will be cleared.
●
Resume points are memorised for each side of a double-sided disc.
ENTER
SLOW – (
)
REMAIN
SUBTITLE
MARK
TOP MENU
MENU
ANGLE
SLOW + (
)
MV5SEK_00.book Page 48 Wednesday, August 31, 2005 7:58 PM
