1-8 (No.XA013)
3.1.5
Remove the power supply board (See figure 7)
• Prior to performing the following procedure, remove the top
cover.
(1) Disconnect the wire from connector
CN5301
,
CN5302
,
CN5303
,
CN5305
,
CN5001
on the power supply board.
(2) Remove the two screws
F
attaching the power supply
board.
(3) Four fasteners are removed.
Fig.7
3.1.6
Remove the main board (See figure 8, figure 9)
• Prior to performing the following procedure, remove the top
cover/front panel assembly/mechanism assembly/module
board/power supply board.
(1) Remove the three screws
G
attaching the main board.
(2) Disconnect the wire from connector
CN7301
,
CN7302
on
the main board.
(3) Remove the seven screws
H
attaching the rear panel with
main board.
Fig.8
Fig.9
Power supply board
CN5001
CN5302
F
CN5303
Fastener
Fastener
Fastener
CN5301
Fastener
CN5305
Main board
G
G
G
CN7301
CN7302
Rear panel
H
H
Содержание DR-M1SL
Страница 37: ...2 24 No XA013SCH MEMO MEMO ...
Страница 38: ... No XA013SCH 2 3 MEMO 2 25 ...