JVC DR-M1SL, Руководство по обслуживанию, Страница: 11 / 56

(No.XA013)1-11
5.1.1 Setting JIG mode
To display SYSTEM INFO or to upgrade firmware, the main body needs to be set to JIG mode.
(1) Turn the main body ON.
(2) Press the buttons of the remote control unit attached to DR-M1SL in the following order : "SET UP"
→
"2"
→
"8"
→
"ENTER"
(3) When a colon ":" between "hour" and "time" of a clock in FL indicator disappears, it means that the main body has been set to
JIG mode properly.
not in JIG mode 3:07 PM
→
in JIG mode 3 07 PM
(4) Turn the main body OFF, and then turn it ON again.
*Once the main body is set to JIG mode, the JIG mode cannot be cancelled even if the power cord is pulled out from the wall
socket.
5.1.2 Canceling JIG mode
(1) Transmit "43-9D" to the main body by using JIG remote control unit.
(2) A colon ":" between "hour" and "time" of a clock in FL indicator appears.
(3) Turn the main body OFF, and then turn it ON again.
NOTE:
After repair work, be sure to cancel JIG mode. Before returning DR-M1SL to a user, confirm that a colon ":" between "hour" and
"time" of a clock in FL indicator appears.
"(2) a-d" shows the order of pressing the buttons.
(2)b
(2)c
(2)d
(2)a
(3)
(1),(4)
3 07 PM