Filename [M100SEK_10Subsidiary.fm]
Masterpage:Left+
62
EN
SUBSIDIARY SETTINGS
RECORDING SET
8
SAVE AS LIBRARY
^
OFF /
ON
When this function is set to
A
ON
B
, the recording information is
automatically stored in the library. For details, refer to
A
Edit Library
Information
B
(
A
pg. 52).
8
XP MODE REC AUDIO
^
DOLBY DIGITAL
/
LINEAR PCM
You can select the audio format when you record a title in XP
mode. When this function is set to
A
LINEAR PCM
B
, you can obtain
a high-quality audio sound.
DOLBY DIGITAL
:
To record in Dolby Digital format.
LINEAR PCM
:
To record in Linear PCM format.
8
AUDIO REC
^
NICAM1/MAIN
/
NICAM2/SUB
/
MONO
You can select the desired NICAM audio channel to be recorded
on a DVD-R/RW (Video mode) disc.
NICAM1/MAIN
:
To record the main language of NICAM audio.
NICAM2/SUB
:
To record the sub language of NICAM audio.
MONO
:
To record the standard (monaural) sound of NICAM audio.
NOTE:
This function works only for the NICAM bilingual programme.
8
DIRECT REC
^
OFF
/
ON
When this function is set to
A
ON
B
, you can easily start recording the
programme that you are watching on your TV. While holding
R
,
press
I
on the remote control, or press
R
on the unit.
NOTES:
●
When you use the Direct Rec function, be sure to use a TV
offering T-V LINK, etc. and connect a fully-wired 21-pin SCART
cable between the unit and the TV. (
A
pg. 17)
●
If
A
DIRECT REC
B
is set to
A
OFF
B
, the
R
button functions as
described in
A
Basic Recording
B
(
A
pg. 35).
●
During Direct Rec,
A
a
B
appears on the front display panel.
●
If a programme is recorded with the Direct Rec, the station name
will not be registered in the library.
A
b
B
will be displayed for
the station name.
●
Even if there is no power supply for more than 60 minutes, the
unit keeps the setting.
DISPLAY SET
8
SUPERIMPOSE
^
OFF /
AUTO
When this function is set to
A
AUTO
B
, various operational indicators
appear on the TV screen.
OFF
:
To turn off superimposed indications.
AUTO
:
To superimpose operational indications for approximately five
seconds just after the corresponding operation.
NOTES:
●
Even when
A
SUPERIMPOSE
B
is set to
A
OFF
B
, you can display
the various operational indicators by pressing
ON SCREEN
on
the remote control. To clear the operational indicators, press
ON SCREEN
again.
●
When you use this unit as the source player for editing, be sure to
set
A
SUPERIMPOSE
B
to
A
OFF
B
before starting. (
A
pg. 57)
●
When you select
A
AUTO
B
, during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
8
GREY BACK
^
OFF /
ON
OFF
:
Select this when you want to receive an unstable channel with
poor signals.
ON
:
When this function is set to
A
ON
B
, the TV screen becomes all
grey when receiving a channel not in use.
8
DIMMER
^
BRIGHT
/ DIMMED1 / DIMMED2 / OFF
You can change the brightness of the front display panel.
BRIGHT
:
Normally select this. To turn on the display and blue lamp of the
front display panel.
DIMMED1
/
DIMMED2
:
To change the brightness level, and turn off the blue lamp of the
front display panel.
OFF
:
To turn off the display and blue lamp of the front display panel.
8
POWER SAVE
^
OFF
/ ON
When this function is set to
A
ON
B
, you can reduce the power
consumption while the unit is turned off.
NOTES:
●
During Power Save mode
^
^
the front display panel will be turned off.
●
It takes some time for the unit to complete initialisation after you
turn on the unit power, with
A
HELLO
B
blinking on the front display
panel.
M100SEK_00.book Page 62 Tuesday, March 22, 2005 5:31 PM
