Filename [M100SEK_07Timer Recording.fm]
Masterpage:Left0
38
EN
TIMER RECORDING
You can programme this unit to timer record as many as 8
programmes.
With the VIDEO Plus+ system, timer programming is greatly
simplified because each TV programme has a corresponding code
number which your unit is able to recognise.
You can use the remote control to enter the PlusCode number.
1
Load a recordable disc.
●
For details, refer to
A
Placing A Disc
B
(
A
pg. 9).
2
Press VIDEO Plus+ to
display the VIDEO
Plus+ screen.
3
Press the
number keys
to enter the
A
PLUSCODE NO.
B
of a
programme you wish to
record, then press
ENTER
.
●
If you have made a
mistake, press
CANCEL
and input the correct number before you press
ENTER
.
●
To clear all entered numbers at a time, press
CLEAR
(
o
).
●
If the number you entered is invalid,
A
PLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRY
B
appears on the TV
screen. Input a valid
A
PLUSCODE NO.
B
.
●
If
A
GUIDE PROGRAMME IS NOT SET SELECT CHANNEL
YOU WANT TO RECORD
B
appears on the TV screen, set
Guide Programme number manually.
●
When
A
PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME
B
appears on the TV screen, you need to cancel
some of the reserved programmes.
4
The
A
PLUSCODE NO.
B
you entered and the matching timer
recording information are displayed on the TV screen. Check
the programme data. To cancel this setting, press
RETURN
.
5
Press
selection keys
to
select desired recording
option as required.
6
Press
selection keys
to
select the desired
setting, then press
ENTER
.
●
A
Daily/Weekly
Recording Function
B
(
A
pg. 38)
●
A
VPS/PDC Recording
B
(
A
pg. 39)
●
A
Recording Mode
B
(
A
pg. 35)
●
A
Modify Title Name
B
(
A
pg. 47)
7
Press
ENTER
to access the Programme Confirmation screen.
8
Press
ENTER
to complete the timer programming.
●
To programme another timer, repeat steps
2
-
8
.
●
If
A
PROGRAMME OVERLAPPED
B
appears on the TV screen,
see
A
When Programmes Overlap Each Other
B
(
A
pg. 42).
9
Press
TIMER
j
to engage the unit’s timer mode.
●
The unit turns off automatically and
j
appears on the front
display panel.
●
To disengage the timer mode, press
TIMER
j
again.
●
There may be cases that the VIDEO Plus+ Timer Programming
function prolongs the stop time of the programming.
●
When two successive programmes are recorded with the VIDEO
Plus+ Timer Programming function, the ending of the first
programme or the beginning of the second programme may not
be recorded.
●
If the copy limited programme is received during timer recording,
the unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you
programmed.
Daily/Weekly Recording Function
You can record programmes with one of the following weekly/daily
timer settings.
VIDEO Plus+ Timer Programming
●
Turn on the unit.
●
Turn on the TV and select an input mode such as EXT1.
●
Make sure that the unit’s built-in clock is set properly.
TIMER
j
(
FGDE
)
ENTER
CANCEL
VIDEO Plus+
0-9
CLEAR (
o
)
RETURN
Selection Keys
1
2
3
4
5
6
7
8
9
0
SP
1 2 3 4
VIDEO Plus+ PRGM
DATE
START
STOP
TV PROG
DAILY/WEEKLY
VPS/PDC
ON
NAME
ENTER SHOWVIEW CODE WITH [0 - 9] KEYS
THEN PRESS [ENTER]
OK
REC MODE
PLUSCODE NO.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed. If not, see
A
VIDEO Plus+ System Setup
B
(
A
pg. 65)
and set the Guide Programme number correctly.
IMPORTANT:
If you have moved to a different area or if a broadcasting
station’s channel number has been changed, the wrong channel
number will be displayed on the VIDEO Plus+ programme
screen in step
4
. When this happens, set the correct Guide
Programme number for that station.
WEEKLY
MON-FRI
MON-SAT
SUN-SAT
Select to record a weekly programme.
Select to record a daily programme from Monday
through Friday.
Select to record a daily programme from Monday
through Saturday.
Select to record a daily programme from Sunday
through Saturday.
LP
1
20:30
20:00
1 2 3 4 0 7 5 1 2
VIDEO Plus+ PRGM
DATE
START
STOP
TV PROG
DAILY/WEEKLY
VPS/PDC
ON
NAME
REC MODE
PLUSCODE NO.
05/07 SAT
SET TIMER PROGRAMMING WITH [CURSORS]
THEN PRESS [ENTER]
CONFIRM
SELECT
PROG
EXIT
M100SEK_00.book Page 38 Tuesday, March 22, 2005 5:31 PM
