JVC DLA-20LTD Скачать руководство пользователя страница 22

Страница: 22 / 84

Turn off the power

Remote control: press the

[STAND BY] button

Projector unit: press the

[STANDBY/ON] button

While the “Are you sure you want to turn off?” message is displayed, press the button again.

The lamp turns off, and the “STANDBY/ON” indicator switches from a green light to a red blinking light.

After the light goes off, the fan will run for about 100 seconds to cool down the lamp (Cool-down mode).

Do not disconnect the power cable while cooling is in progress.

After about 100 seconds, the “STANDBY/ON” indicator switches from a blinking red to a solid red light.

LAMP

WARNING

STANDBY/ON

LAMP

WARNING

STANDBY/ON

TANDBY

In standby state

“STANDBY/ON” lights up (red)

In the Cool-down mode

“STANDBY/ON” blinking (red)

The lens cover closes upon power off.

CAUTION

The power cannot be turned off within approximately 60 seconds after it has been turned on.

The power cannot be turned on again while cooling is in progress (100 seconds).

Pull out the power plug when the unit is not to be used for a prolonged period of time.

If the indication of indicator differs from the description, refer to “Indicator Display on the Main Unit”P. 78 for details.

Operate

Содержание DLA-20LTD





















































































Результаты поиска

Содержание DLA-20LTD

Отзывы:

Похожие инструкции для DLA-20LTD

Бренды по названию

Популярные бренды

JVC DLA-20LTD, Инструкция по эксплуатации

Результаты поиска

Содержание DLA-20LTD

Отзывы:

Похожие инструкции для DLA-20LTD

Бренды по названию

Популярные бренды