background image

 

EN

 

 5

 

MasterPage: Start_Right

 

IMPORTANT SAFETY INSTRUCTIONS

 

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install 

in accordance with the manufacturer’s 
instructions.

8. Do not install near any heat sources such as 

radiators, heat registers, stoves, or other 
apparatus (including amplifiers) that produce 
heat.

9. Only use attachments/accessories specified 

by the manufacturer.

10. Use only with the 

cart, stand, tripod, 
bracket, or table 
specified by the 
manufacturer, or 
sold with the 
apparatus. When a 
cart is used, use 
caution when 
moving the cart/
apparatus combination to avoid injury from tip-
over.

11. Unplug this apparatus during lightning storms 

or when unused for long periods of time.

12. Refer all servicing to qualified service 

personnel. Servicing is required when the 
apparatus has been damaged in any way, 
such as power-supply cord or plug is 
damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus 
has been exposed to rain or moisture, does 
not operate normally, or has been dropped.

 

Before cleaning, turn off the camcorder and 
remove the battery pack and AC Adapter. 

 

To clean the exterior

 

Wipe gently with a soft cloth. Put the cloth in 
diluted mild soap and wring it well to wipe off 
heavy dirt. Then wipe again with a dry cloth.

 

To clean the LCD monitor

 

Wipe gently with a soft cloth. Be careful not to 
damage the monitor. Close the LCD monitor.

 

To clean the lens

 

Blow it with a blower brush, then wipe gently 
with lens cleaning paper.

 

To clean the viewfinder lens

 

Remove dust from the viewfinder using a 
blower brush.

NOTES:

 

 

Avoid using strong cleaning agents such as 
benzine or alcohol.

 

 

Cleaning should be done only after the battery 
pack has been removed or other power units 
have been disconnected.

 

 

Mold may form if the lens is left dirty.

 

 

When using a cleaner or chemically treated 
cloth refer to the cautions of each product.

 

 

To clean the viewfinder, please consult your 
nearest JVC dealer.

 

Appears if dirt is detected on the heads during 
recording. Use an optional cleaning cassette 

 

(

 

 

 pg. 3)

 

.

 

Cleaning The Camcorder

 

USE CLEANING CASSETTE

 

USER MAINTENANCE

 

GR-D796US_EN.book  Page 5  Friday, December 15, 2006  11:31 AM

Содержание D796 - GR Camcorder - 680 KP

















































Отзывы: