Additional preparation
53
HV-32D25EJW / LCT1271-001A-U / ENGLISH
Surround speakers
1
:
Connect surround speakers to the TV
when you want to use the DOLBY
SURROUND function to enjoy surround
sound.
• Even without surround speakers, you
can easily enjoy surround sound by
using the 3D-PHONIC function.
• Use 8-ohm impedance type speakers.
• Pay attention to the positive (+) and
negative (-) polarities when connecting
surround speakers to your TV.
• For the best effect, position the
surround speakers at least 1 metre
above the heads of seated viewers.
Front speaker system
(Front L/R speakers
2
2
2
2
and
amplifier
3
3
3
3
):
You can use your hi-fi audio system
speakers instead of the TV speakers.
Subwoofer system
(Subwoofer
4
and amplifier
5
):
Using the subwoofer system improves the
playing performance of low sounds.
• It is particularly effective with the low
frequency effects (LFE) included in
5.1-channel Dolby Digital surround
sound.
• When a front speaker system and/or
subwoofer system is connected, listen
to the sound from the connected
equipment. Depending on the settings,
it may not be possible to hear the
sound using just the TV speaker. To
listen to the sound from the TV
speaker without using the connected
equipment, change the settings with
one of the following.
- Set the SOUND SETTING
SPEAKER to ON, or
- Set the SURROUND FEATURES
3D-PHONIC or DOLBY
SURROUND TV SPEAKER to “L/
C/R”.
To listen to the sound from the
connected equipment after changing
the settings, change the settings back
to match the connected equipment.
R
AUDIO OUT
SURROUND
REAR
L
SUB
WOOFER
1
2
3
Back of the TV
Positioning of speakers
Approx.
45 degrees
L
R
L
R
L
R
L
R
HV-32D25EJW.fm Page 53 Monday, October 21, 2002 1:19 PM
