JVC CU-VH1, Инструкция по эксплуатации

Страница: 27 / 64

EN
27
Master Page: Right
To Print By Selecting Still Images And Number
Of Prints
1
Perform steps 1 – 6 in “To Print All Still Images
(One Print For Each)” (
墌
pg. 26).
2
Press
R
or
T
to select
“CURRENT”, and press
MENU . The DPOF screen
appears.
3
Press
3
or
5
to
select the desired file.
4
Press
R
or
T
to select the number indication
(00), and press MENU .
5
Select the number of prints
by pressing
R
to increase
number, or “
T
” to
decrease the number, and
press
MENU .
●
Repeat steps 3 through 5
for the desired number
of prints.
●
The number of prints can be set up to 15.
●
To correct the number of prints, select the
image again and change the number.
6
Press
R
or
T
to select
“RETURN”, and press
MENU . The “SAVE?”
appears.
●
If you did not change
any settings in step
3
through 5 , the Menu
Screen reappears.
7
Press
R
or
T
to select “EXECUTE” to save the
setting you have just made, and press MENU .
●
To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1
Perform steps 1 – 6 in “To Print All Still Images
(One Print For Each)” (
墌
pg. 26).
2
Press
R
or
T
to select “RESET”, and press
MENU . The DPOF screen appears.
3
Press
R
or
T
to select “EXECUTE”, and press
MENU . The normal playback screen appears.
●
To cancel selection, select “RETURN”.
●
The number of prints is reset to 0 for all still
images.
You can initialize a memory card any time.
After initializing, all files and data stored in the
memory card, including those which have been
protected, are cleared.
1
Open the LCD monitor fully.
●
Set the Video Output Mode Switch to “LCD
MONITOR”. (
墌
pg. 13)
2
Set the Playback Mode Switch to “MEMORY”.
3
Set the Power Switch to “ON” while pressing
down the Lock Button located on the switch.
4
Press MENU . The Menu
Screen appears.
5
Press
R
or
T
to select
“FORMAT”, and press
MENU . The FORMAT
screen appears.
6
Press
R
or
T
to select
“EXECUTE”, and press
MENU . The memory card
is initialized.
●
When initialization is finished, “NO IMAGES
STORED” appears.
●
To cancel initialization, select “RETURN”.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
RETURN
SHEETS
DPOF
0 0
SHEETS
DPOF
0 5
DPOF
EXECUTE
SAVE?
CANCEL
Initializing A Memory Card
CAUTION:
Do not perform any other operation (such as
turning off the player) during initialization. Also,
be sure to use the provided AC Power Adapter/
Charger, as the memory card may be corrupted if
the battery becomes exhausted during
initialization.
MENU
D I SPLAY
END
PROTECT
DELETE
DPOF
NO . RESET
FORMAT
ORMAT F
EXECUTE
DATA? EX I ST I NG
ERASE AL L
RETURN
DIGIT
A
L STILL CAMERA (D.S
.C.)
PLA
Y
B
A
C
K
CU-VH1US.book Page 27 Friday, November 28, 2003 8:01 PM