18
Using the CD Player
To Unload a CD
Press the
0
button on the Unit to eject a CD. The CD is
ejected automatically, then take out the CD.
Basics of Using the CD Player
— Normal Play
To Play a CD
1
Insert a CD.
2
Press the
3¥8
button.
The first track of the CD begins playing.
• The CD Player automatically stops when the last
track of the CD has finished playing.
To stop playing the CD,
press the
7
button.
The following information for the CD is displayed.
To stop playing and remove the CD,
press the
0
but-
ton on the Unit.
To pause,
press the
3¥8
button. The playback time blinks
on the display.
To cancel pause,
press the same button again. Play con-
tinues from the point where it was paused.
To Select a Track or Passage within a Track
In the stop mode or during playback, press the Number but-
ton on the Remote Control to select the track you want.
• The selected track starts playing.
• For the track number more than 10, press the +10
button then the Number button.
OR
During playback, press the
4
or
¢
button to select the
track you want.
• The selected track starts playing.
• Press the
¢
button once to skip to the beginning of
the next track.
• Press the
4
button to skip to the beginning of the
track being played. Press twice quickly to skip to the
beginning of the previous track.
Search Play
Holding down the
4
or
¢
button, during playback, will
fast forward/backwards the CD so you can quickly find a
particular passage in the track you are listening to.
• The < or > and
or
buttons on the Remote Control
operate same as the
4
or
¢
button does.
SOURCE
PRESET
VOL
COMPACT COMPONENT SYSTEM
COMP A
CT COMPONENT SYSTEM
SOURCE
PRESET
VOL
(when the Unit is placed
vertically)
(when the Unit is placed
horizontally)
Track number
Playback time
Total track number
Total playback time
VS-DT6-8(J)_EN.book Page 18 Monday, January 21, 2002 5:05 PM
