13
Basic Operations
Changing the Color (COLOR)
(VS-DT8 only)
(Using the Remote Control)
You can change the color of the illumination on the Unit.
1
Press the
%
button to turn on the Sys-
tem.
2
Press the COLOR button on the Remote
Control.
“RANDOM COLOR” is displayed.
3
Press the
or
button to select the
setting of your choice.
The color changes as follows:
Adjusting the Volume
To increase the volume, press the button on the
Remote Control (or VOL + button on the Unit).
To decrease the volume, press the VOLUME – button on
the Remote Control (or VOL – button on the Unit).
You can adjust the volume level between 0 and 50.
CAUTION:
• DO NOT turn off the System with the vol-
ume set to an extremely high level; other-
wise a sudden blast of sound could
damage your hearing, speakers and/or
headphones when you turn on the System
or start playing any source next time.
REMEMBER you cannot adjust the volume
level while the System is in standby mode.
For private listening
Connect a pair of headphones to the PHONES jack. No
sound comes out of the speakers.
Be sure to turn down the volume before connecting or put-
ting on headphones.
RANDOM COLOR:
The color changes randomly.
B | R:
(Blue) (Red)
The color between blue and
red is selectable in 16 steps
using the > or < button.
GRADATION:
The color changes gradually
between blue and red.
(Blue)
(Red)
PHONES
PHONES
VS-DT6-8(J)_EN.book Page 13 Monday, January 21, 2002 5:05 PM
