JVC CA-MXJ30, Инструкция по эксплуатации

Страница: 19 / 30

– 14 –
English
Playing Back CDs
Loading CDs
1
Press
0
for the disc tray (CD 1 to
3) you want to load a CD onto.
The unit automatically turns on and the disc
tray comes out. The Powered Rolling Panel
also opens automatically.
2
Place a disc correctly on the circle of the disc
tray, with its label side up.
• When using a CD single (8 cm), place it on the inner
circle of the disc tray.
3
Press the same
0
you have pressed
in step 1.
The disc tray closes, and the corresponding
disc number indicator (CD 1 to CD 3) lights
up on the display.
4
Repeat steps 1 to 3 to place other CDs.
When loading more than one CD continuously
When you press
0
for the next tray you want to place another CD
onto, the first disc tray automatically closes and then the next tray
comes out.
About the disc indicators
Each disc indicator corresponds to the disc tray of the same number.
• The disc marker lights up for the disc number you have selected.
• The disc indicator flashes while the corresponding CD is being
played.
• The disc indicator goes off when the unit has detected that there is
no CD on the corresponding disc tray.
Playing Back the Entire Discs — Continuous
Play
You can play CDs continuously.
1
Load CDs.
2
Press one of the disc number
buttons (CD 1, CD 2, and CD 3)
for the disc you want to play.
CD play starts from the first track of the
selected disc.
• Pressing CD
6
instead of the disc number buttons
starts playing back if a CD is on the trays.
To stop during play, press
7
.
To remove the disc, press
0
for the corresponding disc tray.
CD playback sequence
When 3 CDs are loaded on the disc trays, they are played in one of
the following sequences.
• When CD 1 is pressed : CD 1
]
CD 2
]
CD 3 (then stops)
• When CD 2 is pressed : CD 2
]
CD 3
]
CD 1 (then stops)
• When CD 3 is pressed : CD 3
]
CD 1
]
CD 2 (then stops)
* When only 2 CDs are loaded, they are played in the same order,
but the disc tray without a CD is skipped.
Basic CD Operations
While playing a CD, you can do the following operations.
To exchange CDs during playback of another
Press
0
corresponding to a CD, not playing or selected
currently, to eject and exchange the CD.
If you exchange CDs during play, the current play will not
stop until all CDs you have exchanged are played.
To stop play for a moment
Press CD
6
.
While pausing, the elapsed playing time flashes
on the display.
To resume play, press CD
6
again.
CD
1
CD
2
CD
3
Track number
Elapsed playing time
C D
CORRECT
INCORRECT
Disc marker
Disc number
Disc indicator
Continued
1 2 3
1 2 3
ST
A.BASS EX
REC
S.MODE
EN14-17.CA-MXJ30/330/35R[E]/f 99.2.19, 4:58 PM 14