6
English
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the Video Out
Setting Video Output
Press the NTSC/PAL/PAL AUTO button on the Unit repeatedly until playback picture appears correctly
on the TV screen.
Each time you press the button, video output changes as follows:
=
PAL
=
PAL AUTO
=
NTSC
=
(back to the beginning)
PAL ....................
for a PAL exclusive TV.
PAL AUTO* .......
for a Multisystem TV.
NTSC .................
for an NTSC exclusive TV.
*
PAL AUTO detects the formula of the disc (NTSC/PAL) automatically and views picture on the TV
screen correctly.
Notes:
•
If you change video output setting during playback, picture may get distorted. In this case, stop
playback and set video output setting correctly.
•
When you play an NTSC disc with PAL AUTO setting on a PAL exclusive TV, the picture may get
distorted. If this happens, set video output to PAL.
•
When you play an NTSC disc with PAL AUTO setting on a Multisystem TV, the picture may blinks
for a moment. This symptom is caused by the Unit detecting the formula of the disc, not by a
malfunction of the Unit.
Now you can plug the AC power cord into the wall outlet, and your System is
at your command!
Using the Video Cord
To play back pictures correctly on the TV screen, set the video output correctly according to your TV
system before use.
Refer to “Setting Video Output” below.
NTSC/PAL
/PAL AUTO
VIDEO
OUT
EN.01-36.MX-J111V[U]/f
99.9.17, 3:57 PM
6
