JVC CA-HXZ3, Инструкция по эксплуатации, Страница: 23 / 47

– 20 –
4
Select a track from the selected
disc in step
3
.
On the unit:
Turn
4
/
¢
to select the
track number, then press
SET/DISPLAY.
On the remote control:
Press the number buttons.
• For how to use the number
buttons, see “To go to another
track directly using the number
buttons” on page 19.
5
Program other tracks you want.
• To program tracks from the same disc, repeat step 4 .
• To program tracks from a different disc, repeat steps
3
and
4
.
6
Press CD
3¥8
.
The tracks are played in the order you
have programed.
• If the playing disc is an MP3 disc, the
MP3 indicator lights up.
To stop playing, press
7
.
To exit from Program Play mode, press CD PLAY MODE
repeatedly until the PRGM (program) indicator goes off (or
press PROGRAM on the remote control) after playback
stops.
• If you try to program a 51st track, “CD FULL” will be flashing on
the display.
• If you have tried to program a track from an empty tray, “NO
DISC 1,” “NO DISC 2,” or “NO DISC 3” will appear on the
display for 2 seconds.
• If the track number you have programed does not exist on the
disc, it will be skipped during play.
Track number
CD3
CD2
CD1
P R G M
Disc number Program step number
SET /
DISPLAY
PRESET
1
4
7
10
2
5
8
3
6
9
10
CD
Programming the Playing Order of the Tracks
—Program Play
You can arrange the playing order of the tracks before you
start playing.
You can program up to 50 tracks.
• To use Repeat Play (see page 22) for Program Play, press
REPEAT after starting Program Play. Only REPEAT 1 and
REPEAT ALL can be selected for Program Play.
• There is a time limit in doing the following steps. If the setting
is canceled before you finish, start from step
2
again.
1
Load discs.
• If the current playing source is not the CD player, press
CD
3¥8
, then
7
before going to the next step.
2
Activate the Program Play mode.
On the unit:
Press CD PLAY MODE repeatedly
until “CD PROGRAM” appears on
the display.
• Each time you press the button, the play
mode changes as follows:
On the remote control:
Press PROGRAM so that
“CD PROGRAM” appears
on the display.
• The PRGM (program) indicator lights up on the display.
3
Press one of the disc number
(CD1, CD2, or CD3) buttons
to select the disc you want to
play.
CD PLAY
MODE
PROGRAM
CD PROGRAM
Canceled
(Continuous Play)
CD RANDOM
P R G M
Continued
EN16-23.CA-HXZ3R[B]f.p65 5/21/02, 2:09 PM 20