1-22 (No.MB188)
3.2.6 Removing the DVD traverse mechanism assembly
(See Fig.11)
• Prior to performing the following procedures, remove the tray
assemblies and DVD servo board.
(1) From the bottom side of the DVD changer mechanism as-
sembly, remove the three screws
H
attaching the DVD
traverse mechanism assembly.
(2) Remove the card wire from the section
i
.
(3) Remove the wire from the section
j
.
(4) Take out the DVD traverse mechanism assembly from the
DVD changer mechanism assembly.
Fig.11
H
H
DVD changer mechanism assembly
DVD traverse mechanism assembly
j
i