background image

1

Introduction

Thank you for purchasing the JVC Compact Component System.
We hope it will be a valued addition to your home, giving you years of enjoyment.
Be sure to read this instruction manual carefully before operating your new stereo system.
In it you will find all the information you need to set up and use the system.
If you have a query that is not answered by the manual, please contact your dealer. 

Features

Here are some of the things that make your System both powerful and simple to use.

The controls and operations have been redesigned to make them very easy to use, freeing you to 
just enjoy the music.
• With JVC’s 

COMPU PLAY

 you can turn on the System and automatically start the Radio or 

CD Player with a single touch.

The System incorporates AHB (Active Hyper Bass) PRO circuitry to faithfully reproduce low 
frequency sound.

A 45-station preset capability (30 FM and 15 AM (MW)) in addition to auto-seek and manual tuning.

CD options that include repeat, random and program play.

Timer functions; Daily Timer and Sleep Timer. The Daily Timer can select one of 10 melodies as a source, in addition to 
CD, FM, AM (MW) and LINE.

You can connect various external units, such as an MD recorder.

The system can play CD-R and CD-RW after they have been 

finalized

.

You can play back your original CD-R or CD-RW recorded in Music CD format. (However they may not be played back 
depending on their characteristics or recording conditions.)

How This Manual Is Organized

• Basic information that is the same for many different functions - e.g. setting the volume - is given in the section 

‘Basic Operations’, and not repeated under each function.

• The names of buttons/controls and display messages are written in all capital letters: e.g. FM/AM, “CD NO DISC”.
• System functions are written with an initial capital letter only: e.g. Normal Play.

Use the table of contents to look up specific information you require.
We have enjoyed making this manual for you, and hope it serves you in enjoying the many features built into your System.

WARNINGS

DO NOT PUT ANYTHING ON THE CD DOOR. IF THE SYSTEM IS OPERATED WITH 
SOMETHING PUT ON THE CD DOOR, IT WILL BE DAMAGED WHEN YOU TRY TO 
OPEN THE CD DOOR.

NEVER REMOVE THE CD DOOR FROM THE UNIT. SERIOUS INJURY MAY OCCUR IF 
THE SYSTEM IS OPERATED WITHOUT THE CD DOOR.

IMPORTANT CAUTIONS

1

Installation of the System

• Select a place which is level, dry and neither too hot nor too cold. (Between 5°C and 35°C)
• Leave sufficient distance between the System and a TV.
• Do not use the System in a place subject to vibrations.

2

Power cord

• Do not handle the power cord with wet hands!
• Some power is always consumed as long as the power cord is connected to the wall outlet.
• When unplugging the System from the wall outlet, always pull the plug, not the power cord.

3

Malfunctions, etc.

• There are no users serviceable parts inside. In case of system failure, unplug the power cord and consult your dealer.
• Do not insert any metallic object into the System.
• Do not insert your hand between the CD door and the main body when the CD door is being closed.

FS-X5(B)_E_Intro.fm  Page 1  Tuesday, April 1, 2003  9:43 AM

Содержание CA-FSX5



































Отзывы: