background image

15

Loading Discs

On the unit ONLY:

1

Press one of the disc eject buttons (CD1

0

 –

CD5

0

) for the disc tray you want to load a

disc onto.

The unit automatically turns on and the selected disc tray
comes out.

2

Place a disc correctly on the circle of the disc
tray, with its label side up.

• When using a CD single (8 cm), place it on the inner

circle of the disc tray.

3

Press the same disc eject button (CD1

0

 –

CD5

0

) you have pressed in step 

1

.

The disc tray closes.

When loading more than one disc at a time

Press the disc eject button (CD1

0

 – CD5

0

) for the next tray you

want to place a disc onto. The first disc tray automatically closes and
the next disc tray comes out.

While playback
is stopped.

During
playback.

When no disc
is on the tray.

Playing Back Discs on the 5-CD Changer

This unit has been designed to play back the following
discs—CD, CD-R, and CD-RW.
You can play back the discs containing the tracks in music
CD format or MP3 files in ISO 9660 format.
• In this instruction, we call a disc recorded MP3 files “MP3

disc,” and “file” is also referred to as “track.”

When playing CD-Rs or CD-RWs

• Before playing CD-Rs or CD-RWs, read their instructions

or cautions carefully.

• User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-

ReWritable) can be played only if they are already

finalized

.”

• This unit supports “multi-session” discs (up to 5 sessions).
• This unit cannot play “packet write” discs.
• Some CD-Rs or CD-RWs may not be played back on this

unit because of their disc characteristics, damage or stain
on them, or if the player’s lens is dirty.

• CD-RWs may require a longer readout time. This is

because the reflectance of CD-RWs is lower than for
regular discs.

Notes for MP3 files

• The player can only recognize files with “MP3” or “mp3”

as the extensions, which can be in any combination of
upper and lower case.

• It is recommended that you record your material at a 44.1

kHz sampling rate, using the 128 kbps data transfer rate.

• Some MP3 files or discs may not be played back because

of their characteristics or recording conditions.

• MP3 discs requires a longer readout time than normal discs

because of the complexity of the group/file configuration.

• MP3i and MP3 Pro are not available.

General notes

In general, you will have the best performance by keeping
your discs and the mechanism clean.
• Store discs in their cases, and keep them in

cabinets or on shelves.

• Keep the unit’s disc trays closed when not in use.
• Continued use of irregular shape discs (heart-

shape, octagonal, etc.) can damage the unit.

About the disc indicators

Good

Not good

1

1

1

Disc number
indicator

Current disc
indicator

CD1

CD2

CD3

CD4

CD5

• When the current source is “CD,” the 

CD

 indicator also

lights up on the display.

15_19_FS_S57[J]_2.p65

04.2.16, 10:00 PM

15

Содержание CA-FSS57



























































Отзывы: