JVC CA-FSH300 страница 45 Скачать руководство пользователя

Страница: 45 / 58

English

Repeating Tracks—Repeat Play

You can have all the tracks, the program or individual track
currently playing, repeat as many times as you like.

On the remote control ONLY:

Press REPEAT repeatedly before or
during playback.

• Each time you press the button, Repeat Play

changes as follows, and the following repeat
indicators light up on the display:

When playing back audio CD:

ALL

: In Normal Play, repeats all the tracks.

In Program Play, repeats all the tracks in the
program.

Repeats one track.

When playing back MP3 disc:

ALL

: In Normal Play, repeats all the tracks.

In Program Play and Random Play, repeats all
the tracks in the program.

GR.

: In Normal Play, repeats all the tracks in a

group.
In Program Play and Random Play, this
function is not available.

Repeats one track.
In Random Play, this function is not available.

To cancel Repeat Play,

press REPEAT

repeatedly until the repeat indicator goes off.

PROGRAM

PRESET

GROUP

PRESET

GROUP

DOWN

REPEAT

Canceled

ALL

Repeat indicators

ALL

GR.

Canceled

PROGRAM

Repeat step

to program other tracks you

want.

Press CD

The tracks are played in the order you have
programed.

If you try to program a 41st track

“– – FULL – –” will appear on the display.

To stop playing,

press

To check the program contents

You can check the program contents by pressing
PROGRAM repeatedly before or after playback.

To modify the program

Press PROGRAM repeatedly until the program
step number you want to modify appears. Then
follow step

of the programming procedure.

• Pressing 0 deletes the selected step.

To add tracks in the program,

press

PROGRAM repeatedly until “0” appears as the
track number. Then follow steps

of the

programming procedure.

To clear the program

Press

before or after playback.

The

PRGM

indicator disappears from the

display and all the memory contents will be
erased (resumes to Normal Play).
• The programmed tracks are also erased in the

following cases:
– Pressing

)

OPEN to open the disc cover.

– Turning off the unit.
– Changing the source.

During Program Play

Auto Standby function does not take effect.

PRESET

GROUP

PRESET

GROUP

DOWN

PROGRAM

REPEAT

Continued

10-14_FS-H350&H300[C]2.p65

04.3.18, 10:36 AM

Содержание CA-FSH300



























































Результаты поиска

Содержание CA-FSH300

Отзывы:

Похожие инструкции для CA-FSH300

Бренды по названию

Популярные бренды

JVC CA-FSH300, Инструкция по эксплуатации

Результаты поиска

Содержание CA-FSH300

Отзывы:

Похожие инструкции для CA-FSH300

Бренды по названию

Популярные бренды