background image

9

English

Selecting the Source

To select the source,

 press CD 

6

, TAPE 

2

 

3

, FM/AM, or

AUX.
• When you select CD as the source, playback starts

automatically.

To operate the CD player, 

see pages 10 to 13.

To operate the tape deck,

 see page 14.

To operate the tuner (FM or AM), 

see pages 15 and 16.

To record on a tape,

 see pages 17 and 18.

To use an external equipment,

 see page 16.

Adjusting the Volume

You can adjust the volume level only while the unit is turned
on. The volume level can be adjusted between “VOL MIN,”
“VOL  1” – “VOL 29,” and “VOL MAX.”
• The volume level has no effect on recording.

To increase the volume, 

press

 

(or

turn

 

VOLUME control clockwise on the unit).

To decrease the volume, 

press

 

VOLUME – (or

turn

 

VOLUME control counterclockwise on the

unit).
• When you press and hold either button, you can change the

volume level continuously.

For private listening

Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers. Be sure to turn down the volume before
connecting or putting on the headphones.

DO NOT turn off (standby) the unit with the volume
set to an extremely high level; Otherwise, the
sudden blast of sound can damage your hearing,
speakers and/or headphones when you turn on the
unit or start playing any source.
REMEMBER you cannot adjust the volume level
while the unit is in standby mode.

Fade-Out Muting (FADE MUTING)

On the remote control ONLY:

Press FADE MUTING.

The volume level decreases to “VOL MIN,” and
“MUTING” appears on the display.

To release muting, 

press FADE MUTING again. The

volume level resumes to the previous level.

VOLUME

FADE MUTING

SOUND/HBS

SOUND

SOUND/HBS

BASS

Selecting the Sound Modes

You can select one of the 4 sound modes.
• This function also affects the sound from headphones.
• This function only affects the playback sound, and does not

affect your recording.

On the remote control ONLY:

To select the sound modes,

 press SOUND/HBS

repeatedly.
• Each time you press the button, the sound mode

changes as follows:

ROCK:

Powerful sound emphasizing treble and bass.

POP:

More presence in the vocals and midrange.

CLASSIC:

Enriched sound with fine treble and ample bass.

JAZZ:

Accented lower frequencies for jazz-type music.

FLAT:

Equalizer effect is canceled.

When the sound mode is activated, the 

SOUND

 indicator lights

up on the display.

Reinforcing the Bass Sound

You can boost the bass sound.
• This function only affects the playback sound, and does not

affect your recording.

On the remote control ONLY:

Press and hold SOUND/HBS.

• Each time you press and hold the SOUND/

HBS, HBS turns on and off.

When the HBS is activated, the 

BASS

 indicator lights up on

the display.

Checking the Clock Time During Play

On the remote control ONLY:

Press DISPLAY.

• Each time you press the button, the display

changes the clock indication and the normal
indication alternately. After changing the
display to the clock indication, operating any button or
control also changes the display to the normal indication.

DISPLAY

ROCK

JAZZ

FLAT

CLASSIC

POP

(Canceled)

08-09_FS-H350&H300[C]2.p65

04.3.18, 10:36 AM

9

Содержание CA-FSH300



























































Отзывы: