1-10 (No.MB616<Rev.002>)
3.1.3 Removing the VIDEO BOARD assembly
(See Fig.7, 8)
(1) Disconnect the card wire from MAIN BOARD assembly
connected to connector
CN920
of the VIDEO BOARD as-
sembly. (See Fig.7)
(2) Disconnect the card wire from SURROUND AMP BOARD
assembly connected to connector
CN931
of the VIDEO
BOARD assembly. (See Fig.7)
(3) Remove the three screws
D
attaching the VIDEO BOARD
assembly. (See Fig.8)
Fig.7
Fig.8
3.1.4 Removing the MECHA CHASSIS
(See Fig.9, 10)
(1) Remove the two screws
E
attaching the MECHA CHAS-
SIS. (See Fig.9)
(2) Remove the two screws
F
attaching the both side of
MECHA CHASSIS (See Fig.10)
Fig.9
Fig.10
CN920
CN931
D
E
F
