1-13
RC-BZ5LB/BZ5RD
RC-BZ6BU
Main belt
Capstan motor ass’ y
Eject slide
lever
Motor bracket
Flywheel ass’ y
Leaf switch
Fig.2
Fig.1
Fig.3
<Cassette mechanism section>
A
a
Eject slide lever
b
Stopper arm
Leaf switch
d
c
Capstan motor
(Fig.1)
1. Remove the cassette mechanism assembly. (Refer
to the article “Cassette mechanism assembly”
appearing on a previous page.)
2. Remove one screw A retaining the capstan motor
assembly from the back of the cassette mechanism
assembly.
3. Disengage the main belt from the flywheel assembly.
Then slide the capstan motor slightly in the direction
of the arrow a while lifting it upwards to remove
together with the main belt.
Eject slide lever
(Fig.2)
1. Place the cassette mechanism back side frontward
and disengage the stopper arm b of the Eject slide
lever by pressing it inwards through the opening of
the chassis with a small screwdriver as shown in
Fig.2.
Leaf switch
(Fig.3)
1. Press the leaf switch in the direction of the arrow c
and then remove it in the direction of the arrow d
referring to Fig.3.
