No.51866
AV-T2122
21
Item
Measuring
instrument
Test point
Adjustment item
Description
SUB BRIGHT
adjustment
Remote
control unit
No.2 BRIGHT
1. Receive a broadcast.
2. Select “No.2 BRIGHT” of the PICTURE mode in SERVICE
MENU.
3. Confirm the initial setting value of the “No.2 BRIGHT” .
4. If the brightness is not the best with the initial setting value,
make fine adjustment of the “No.2 BRIGHT” until you get the
optimum brightness.
SUB
CONTRAST
adjustment
Remote
control unit
No.1 PICTURE
1. Receive a broadcast.
2. Select “No.1 PICTURE” of the PICTURE mode in SERVICE
MENU.
3. Confirm the initial setting value of the “No.1 PICTURE”.
4. If the contrast is not the best with the initial setting value, make
fine adjustment of the “No.1 PICTURE” until you get the
optimum contrast.
SUB COLOR
adjustment
Remote
control unit
No.3 COL. PALM
No.4 COL. PALN
No.5 COL. NTSC
[PAL-M]
1. Receive a PAL-M color bar signal.
2. Select “No.3 COL. PALM” of the PICTURE mode in SERVICE
MENU.
3. Confirm the initial setting value of the “No.3 COL. PALM”.
4. If the color is not the best with the initial setting value, make
fine adjustment until you get the best color.
[PAL-N]
1. Receive a PAL-N color bar signal.
2. Select “No.4 COL. PALN” of the PICTURE mode in SERVICE
MENU.
3. Confirm the initial setting value of the “No.4 COL. PALN”.
4. If the color is not the best with the initial setting value, make
fine adjustment until you get the best color.
[NTSC]
1. Receive a NTSC color bar signal.
2. Select “No.5 COL. NTSC” of the PICTURE mode in SERVICE
MENU.
3. Confirm the initial setting value of the “No.5 COL. NTSC”.
4. If the color is not the best with the initial setting value, make
fine adjustment until you get the best color.
SUB TINT
adjustment
Remote
control unit
No. 6 TINT
1. Receive a NTSC color bar signal.
2. Select “No. 6 TINT” of the PICTURE mode in SERVICE
MENU.
3. Confirm the initial setting value of the “No. 6 TINT”.
4. If the tint is not the best with the initial setting value, make fine
adjustment until you get the best tint.