15
ENGLISH
Function description
Each function and set value for the ON-SCREEN ADJUSTMENTS are shown in the table below.
*1
P
age 1
P
age 2
P
age 1
P
age 2
P
age 3
P
age 4
*2
Items
Function description
Store settings Default value
WHITE BALANCE
AW SET,
MANUAL
AW SET
AW SET : Allows automatic picture tone setting just by pressing the AUTO WHITE
SET button.
MANUAL : Allows manual picture tone setting with the [RED LEVEL] and [BLUE LEVEL] options.
IRIS MODE
AUTO,
MANUAL
AUTO
AUTO
: When the ambient brightness changes, picture brightness is automatically
adjusted.
MANUAL : Picture brightness is fixed.
TEXT MODE
OFF, ON
OFF
When ON is selected, characters are clearer and sharper. Effective when this is
used to show text-only documents.
NEGA/POSI
POSI, NEGA
POSI
Use to reverse the image when presenting e.g. a film negative.
DIGITAL ZOOM
X2, X3, X4
X4
Use to obtain maximum magnification when the digital zoom function is used.
DETAIL*3
-10 to +10 (1-step)
0
Use to adjust video contours. The picture gets sharper as the setting increases from
-10 to +10.
BLACK LEVEL
-10 to +10 (1-step)
0
Use to adjust the black level of the picture. Black areas in the picture become
sharper as the setting increases from -10 to +10.
POINTER SHAPE
ARROW,
CROSS, PEN
ARROW
Use to select the desired on-screen pointer shape. The available shapes are
ARROW , CROSS and PEN .
POINTER
COLOR
WHITE, YELLOW,
CYAN, GREEN,
MAGENTA, RED, BLUE
WHITE
Use to set the pointer color. Available colors are WHITE (Wh), YELLOW (Ye), CYAN
(Cy), GREEN (G), MAGENTA (Mg), RED (R) and BLUE (B).
SPLIT MODE
OFF, Hori.,
Verti.
OFF
Use to set the split mode.
Hori. : Upper; Camera image, Lower; Still picture, Division ratio; 1:1
Verti. : Left; Camera image, Right; Still picture, Division ratio; 1:1
LOAD
CANCEL,
DEFAULT,
USER
CANCEL
DEFAULT (Defa.)
: Restores the initial values instead of the current conditions*4
when ending the menu.
USER : Restores the values stored in the status memory instead of the current
conditions*4 when ending the menu.
SAVE
CANCEL,
OK
CANCEL
When OK is selected and menu setting is complete, the current conditions* are
stored in the status memory.
ZOOM PRESET 1
ZOOM PRESET 2
Use to set the picture size to be called with the ZOOM PRESET buttons. Different
sizes can be set for 1 and 2.
Set this function to USER to save the specified size by pressing the ZOOM PRESET
1 or 2 for more than 2 seconds.
BW/COLOR
COLOR, B/W COLOR
Use to show a picture in black and white. When this is used to show a black-and-
white document, the picture will be clearer.
0
0
When [AW SET] is selected, use to fine adjust the red level for the auto white set.
When [MANUAL] is selected, use to adjust the red level.
RED LEVEL
*5
-10 to +10 (1-step)
-30 to +30 (1-step)
0
0
When [AUTO] is selected, use to fine adjust the brightness.
When [MANUAL] is selected, use to adjust the brightness.
IRIS LEVEL
*5
-10 to +10 (1-step)
-30 to +30 (1-step)
0
0
When [AW SET] is selected, use to fine adjust the blue level for the auto white set.
When [MANUAL] is selected, use to adjust the blue level.
BLUE LEVEL
*5
-10 to +10 (1-step)
-30 to +30 (1-step)
A4/LTR
A6/4 x 6
USER, A4/LTR,
A5/6 x 8, A6/4 x 6,
A7/3 x 4, SLIDE
*1 The menu screen output to the RGB OUT connectors is shown on 2 pages.
*2 The menu screen output to the VIDEO OUT connector is shown on 4 pages.
*3 The higher the DETAIL set value, the more the noise.
*4 Current conditions means the current on-screen and front panel function settings. However, “DIGITAL ZOOM”, “FREEZE”, “PIC-
TURE MEMORY” and “POINTER” positions are not stored in memory. Thus, when current settings are restored, “DIGITAL ZOOM”,
“FREEZE”, “PICTURE MEMORY” and “POINTER” are set to OFF.
*5 When the picture is displayed on the screen, the colors vary conversely to each of the set values of the "NEGA" mode. This
phenomenon occurs because of the characteristics of the RED, BLUE and IRIS.
Notes:
●
When the C of the SYNC. switch is set to 0, the on-screen signals are not output to the RGB OUT connectors (p. 5).
●
While the on-screen display is available, the “IRIS”, “PC”, “FREEZE”, “VIDEO OUT”, “DIGITAL ZOOM”, “ZOOM PRESET” and
“PICTURE MEMORY” buttons have no effect. The pointer is not shown on the screen.
●
When the power is turned on, the settings stored in the status memory are recalled. “DIGITAL ZOOM”, “FREEZE”, “PICTURE
MEMORY” and “POINTER” are set to OFF. If no data is stored in the status memory, the default settings are used.
