No. 52007
AV-56WP30
22
BASIC OPERATION OF SERVICE MENU
1.
TOOL OF SERVICE MENU OPERATION
Operate the SERVICE MENU with the REMOTE CONTROL UNIT.
2.
SERVICE MENU ITEMS
In general, bas ic setting (adjustments) items or verific ations are performed in the SERVICE MENU.
1. PICTURE / SOUND
・・・・・・・ ・・・
This sets the s etting values of the VIDEO/CHROMA /AUDIO and DEFLECTION circuits.
2. YC SEP
・・・・・・・ ・・・・・・・・・・・・・
This is us ed when the YC mode is adjusted.
[Do not adjust]
3. LOW LIGHT
・・・・・・・ ・・・・・・・・・・
This sets the s etting values of the W HIT E BALANCE circuit.
4. HIGH LIGHT
・・・・・・・ ・・・・・・・・・
This sets the setting values of the WHITE BALANCE circuit.
5. RF AFC
・・・・・・・ ・・・・・・・・・・・・・
This is us ed when the IF VCO is adjusted.
[Do not adjust]
6. (BLANK)
7. I2C BUS
・・・・・・・ ・・・・・・・・・・・・・
This is us ed when ON/OFF if the I
2
C BUS control is stop.
[Do not adjust]
8. PP
・・・・・・・ ・・・・・・・・・・・・・ ・・・・・
This sets the s etting value of the output of P&P data.
9. IP
・・・・・・・ ・・・・・・・・・・・・・ ・・・・・・
This sets the s etting value of the IP circuit.
[Do not adjust]
0. SELF-CHK
・・・・・・・ ・・・・・・・・・・・
This sets the s elf checking of the TV c ircuit.
3. BASIC OPERATIONS OF THE SERVICE MENU
(1) Ho w to enter the SERVICE MENU.
Press
SLEEP TIMER
key and, while the indication of “
SLEEP
TIMER 0 MIN.
” is being dis played, press
DISPLAY
key and
VIDEO
ST ATUS
key on the remote control unit simultaneously
to enter the
SERVICE MENU
screen as shown in the fig.1.
(2) SERVICE MENU screen selection
Press the number key to s elect any of the following items.
1.PICTURE/SOUND
7.I2C BUS
2.YC SEP
8.PP
3.LOW LIGHT
9.IP
4.HIGH LIGHT
0.SELF-CHK
5.RF AFC
(3) Enter the any setting mode
"
1. PICTURE / SOUND mode
1) Select the 1. PICTURE / SOUND items with the number
key, and the FUNCTION (
▲
/
▼
) key is pressed the 1.
PICTURE / SOUND mode, the screen will be displayed as
shown in figure page later.
2) Then the settings or verifications c an be performed.
"
2.YC SEP, 3.LOW LIGHT, 4.HIGH LIGHT, 5.RF AFC,
7.I
2
C BUS, 8.PP, 9.IP and 0.SELF-CHK mode
1) If you select any of 2.YC SEP 3.LOW LIGHT 4.HIGH-
LIGHT 5.RF AFC 7.I
2
C BUS, 8.PP, 9.IP and 0.SELF-CHK
mode items, and the numbers key is pressed from
SERVICE MENU, the each screens will be displayed as
shown in figure page later.
2) Then the settings or verifications can be performed.
Fig. 1
SERV ICE MENU
1. PICTURE/SOUND
2. YC SEP
3. LOW LIGHT
4. HIGH LIGHT
5. RF AFC
6.
7. I2C BUS
8. PP
9. IP
0. SELF-CHK
KEY FUNCTION of SERVICEMENU
FUNCTION ke y
(
▲
/
▼
) & (
/
)
Select the setting value
Select the setting Item
VIDEO STATUS
key
DISPLAY
key
SLEEP TIMER
key
MU TING ke y
MENU key
NUMBERS
key
EXT key
(PIP OFF)
Содержание AV-56WP30
Страница 79: ...No 52007 AV 56WP30 79 Memo ...