1-24 (No. 52195)
Item
Measuring
instrument
Test point
Adjustment part
Description
V. HEIGHT
adjustment
[3. DEF]
2. VER. HEIGHT
13. V. ZOOM
- PAL V. HEIGHT -
(1) Input a PAL cross-hatch signal.
(2) Select
2. VER. HEIGHT
.
(3) Set the initial setting value of
2. VER. HEIGHT
.
(4) Select
13. V. ZOOM
.
(5) Set the initial setting value of
13. V. ZOOM
.
(6) Adjust
13. V. ZOOM
and make the vertical screen size
92% of the picture size.
- NTSC V. HEIGHT -
(1) Receive a NTSC cross-hatch signal.
(2) Make similar adjustment of NTSC V. HEIGHT in the same
way as for “PAL V. HEIGHT”.
Signal
generator
Remote
control unit
H. POSITION
adjustment
Signal
generator
Remote
control unit
H. WIDTH
adjustment
[3.DEF]
6. HOR. WIDTH
- PAL H. WIDTH -
(1) Input a PAL cross-hatch signal.
(2) Select
6. HOR. WIDTH
.
(3) Set the initial setting value of
6. HOR. WIDTH
.
(4) Adjust
6. HOR. WIDTH
and make the horizontal screen
size 91% of the picture size.
- NTSC H. WIDTH -
(1) Receive a NTSC cross-hatch signal.
(2) Make similar adjustment of NTSC H. WIDTH in the same
way as for “PAL H. WIDTH”.
Signal
generator
Remote
control unit
Screen size 91%
Picture size 100%
Screen
size
92%
Picture
size
100%
C
D
[3. DEF]
5. HOR. POSITION
- PAL H. POSITION -
(1) Input a PAL circle pattern signal.
(2) Select
5. HOR. POSITION
.
(3) Set the initial setting value of
5. HOR. POSITION
.
(4) Adjust
5. HOR. POSITION
to make “
C = D
”.
- NTSC H. POSITION -
(1) Receive a NTSC circle pattern signal.
(2) Make similar adjustment of NTSC H. POSITION in the
same way as for “PAL H. POSITION”.
