(No. YA104) 1-29
Item
Measuring
instrument
Test point
Adjustment part
Description
SIDE PIN
adjustment
[4. DEF]
7. EW-PIN
- PAL SIDE PIN -
(1) Receive a PAL crosshatch signal.
(2) Select
7. EW-PIN
.
(3) Set the initial setting value of
7. EW-PIN
.
(4) Adjust
7. EW-PIN
so that the first vertical lines at the left
and right edges on the screen are straight.
- NTSC SIDE PIN -
(1) Receive a NTSC crosshatch signal.
(2) Make similar adjustment of NTSC SIDE PIN in the same
way as for “PAL SIDE PIN”.
Signal
generator
Remote
control unit
TRAPEZIUM
adjustment
[4. DEF]
6. TRAPEZ
- PAL TRAPEZIUM PIN -
(1) Receive a PAL crosshatch signal.
(2) Select
6. TRAPEZ
.
(3) Set the initial setting value of
6. TRAPEZ
.
(4) Adjust
6. TRAPEZ
so that the vertical lines at the left and
right edges on the screen are in parallel.
- NTSC TRAPEZIUM PIN -
(1) Receive a NTSC crosshatch signal.
(2) Make similar adjustment of NTSC TRAPEZIUM in the
same way as for “PAL TRAPEZIUM”.
Signal
generator
Remote
control unit
CORNER PIN
adjustment
Signal
generator
Remote
control unit
- PAL CORNER PIN -
(1) Receive a PAL crosshatch signal.
(2) Select
8. COR-UP
.
(3) Set the initial setting value of
8. COR-UP
.
(4) Select
9. COR-LO
.
(5) Set the initial setting value of
9. COR-LO
.
(6) Adjust
8. COR-UP
and
9. COR-LO
so that the vertical lines
at the four corners on the screen are straight.
- NTSC CORNER PIN -
(1) Receive a NTSC crosshatch signal.
(2) Make similar adjustment of NTSC CORNER in the same
way as for “PAL CORNER”.
(3) Press the [DISPLAY] key twice to return to the normal
screen.
[4. DEF]
8. COR-UP
9. CO-LO
Straight
Parallel
Straigt