10
Setting up your TV
Direct Rec
“What You See Is What You Record”
You can easily record to VCR the images
that you are watching on the TV.
For details, read the manual for your VCR.
Use your VCR controls. “VCR IS
RECORDING” is displayed.
In the following situations, the VCR
will stop recording if the TV is turned
off, if the TV channel or input is
changed, or if the menu is displayed
on the TV:
• when recording images from an external
device connected to the TV (for example
a camcorder)
• when recording a TV channel after it has
been unscrambled on a decoder
• when recording a TV channel by using the
TV’s output because the VCR’s own
tuner cannot properly receive that
channel.
When the VCR is not ready (for example
when there is no tape inserted), “NO
RECORDING” is displayed.
You cannot carry out Direct Rec using your
TV’s control.
Generally, the VCR cannot record a TV
channel that it cannot receive properly on its
own tuner, even if you can view that TV
channel on the TV. However, some VCRs
can record a TV channel by using the TV’s
output if that channel can be viewed on the
TV. For details, see your VCR instruction
manual.
TV auto power on/VCR image view
When the VCR starts playing, the TV
automatically turns on and the images from
the EXT-2 terminal appear on the screen.
When the VCR menu is operated, the TV
automatically turns on and the images from
the EXT-2 terminal appear on the screen.
• This function does not happen if your
TV’s main power is turned off. Set your
TV’s main power to on (standby mode).
AV-32&28X35HKE.book Page 10 Wednesday, January 29, 2003 9:29 AM
