JVC AV-28WFT1, Инструкция по эксплуатации

Страница: 19 / 218

To display the SOUND SETTING menu:
1
Press the button to display MENU
(main menu).
2
Press the button to choose SOUND
SETTING. Then press the button.
■ ■ ■ ■
!!!!
When you are viewing a bilingual broadcast programme, you
can choose the sound from Bilingual I (Sub I) or Bilingual II
(Sub II). When the stereo broadcasting is received poorly, you
can change from stereo to mono sound so that you can hear
the broadcast more clearly and easily.
1
Press buttons to choose STEREO / I • II.
2
Press buttons to choose a sound
mode.
:Stereo sound
:mono sound
:BIlingual I (sub I)
:BIlingual (sub II)
3
Press the button to complete the set-
ting.
The menu disappears.
Note:
•
The sound mode you can choose differs depending
on the TV programme.
•
This function does not work in the EXT modes. And
this function does not appear in the SOUND SET-
TING menu.
■
■ ■
■
""""
You can adjust the sound to your liking.
1
Press the buttons to choose an item.
2
Press the buttons to adjust it.
3
Press the button to complete the set-
ting.
The menu disappears.
■ ■ ■ ■
# ## #
You can turn off the sound from the TV speakers; but you
should only do this if an audio system is connected to the TV
as a substitute for the TV speakers. When you are using this
function, see “Setting the SPEAKER function” on page 29.
When a sound is not issued from the TV speaker:
If the SPEAKER function is set to OFF, the TV speaker does
not issue sound. Press the
buttons to choose the
SPEAKER. Then press buttons to choose ON.
■ ■ ■ ■
$$ $$ $$ $$
You can use the BBE function to enjoy easy-to-listen sound
that is faithful to the original sound recorded.
1
Press buttons to choose BBE.
2
Press buttons to choose ON.
To cancel the BBE function:
Press
buttons to choose OFF.
3
Press the button to complete the set-
ting.
The menu disappears.
•
Licensed by BBE Sound Inc. BBE is a registered trade-
mark of BBE Sound, Inc.
■ ■ ■ ■
% % % %
You can enjoy sounds with a wider ambience.
1
Press buttons to choose HYPER
SOUND.
2
Press buttons to choose ON.
To cancel the HYPER SOUND function:
Press the
buttons to choose OFF.
3
Press the button to complete the set-
ting.
The menu disappears.
Note:
•
The HYPER SOUND function does not work properly
with mono sound.
•
The HYPER SOUND lamp lights while the HYPER
SOUND function is in use.
•
You can turn on or off the HYPER SOUND function
with a single press. For details, see “
4
HYPER
SOUND Button” on page 10.
Item
Weaker
BASS
Stronger
Weaker
TREBLE
Stronger
Left
BALANCE
Right
WFT1EP_E2.fm Page 18 Monday, February 14, 2000 10:31 AM