JVC AV-28RT4BU, Инструкция по эксплуатации

Страница: 10 / 16

- 9 -
Selecting Standard
STANDARD can be selected BG, I, L or DK by pressing “ ”
or “ ” button.
Selecting Colour System
Using “ ” or “ ” button on Colour System , you can change
the colour system to PAL, SECAM or AUTO .
Note: In EXT mode, you can choose NTSC 3.58 and NTSC
4.43 as well.
Selecting Decoder (EXT2)
You can use this mode to connect any decoder to your TV.
• Press the “ ” or “ ” buttons to turn it on or off.
When you turn Decoder on, EXT-2 output will be chosen as TV
mode only and any scrambled channels will be unscrambled
through decoder connected your TV via EXT-2 output.
Decoder setting should be stored separately for each
programme.
Selecting Fine Tuning
You can use the Fine Tuning process for fine adjustment (after
coarse adjustment), if you are not happy with the image on
the screen.
Use “ ” or “ ” button on
FINE TUNING item, until getting
the best image on the screen.
In Channel option, normally the Fine Tuning cursor is placed
at the middle on the slider, and this is indicated with two recip-
rocal arrows.
Selecting Search
• Using “ ” or “ ” button select Search item.
• Press “ ” or “ ” button in order to start channel search.
“ SEARCHING... ” is displayed during the search process.
Searching is stopped as soon as a station is found or “ ”,
“ ”, “ ”, “ ” buttons are pressed.
To Store Settings
• Using “ ” or “ ” button select Store.
• Press “ ” or “ ” button to store Installation menu settings.
Programme Menu
• Press “ MENU ” button, now you are in MENU . In the MENU ,
select PROGRAMME using “ ” or “ ” button. Then enter
the Program menu by pressing “ ” or “ ” button.
0(18
3,&785(
6281'
)($785(
,167$//$7,21
352*5$00(
&
&
&
&
&
&
352*5$035
1$0(
'(/(7(
,16(57
$8726725(
Moving cursor to four directions you can reach 30 programmes
in the same page. You can scroll the pages up or down by
pressing the navigation buttons.
By cursor action, programme selection is done automatically.
Selected programme is displayed with “ HIGHLIGHTED ” char-
acters.
Programme Number is between 00 and 99. Programme Name
has a name string with 5 characters. After autostore process
the Programme Names are set to:
• Channel search “
C01 ” or “ S01 ” (band and channel number),
as default.
At the bottom of the menu there is a programme sort functions
section. Each function is activated by a colour button. NAME,
changes the programme name. DELETE, deletes undesired
programmes. INSERT, inserts a programme into another
programme’s position. By selecting AUTOSTORE , Autostore
menu will be available.
NAME:
You can change the name of a selected programme by press-
ing the RED button ( NAME ). First letter of the selected
programme is displayed with a highlighted character. To
change that letter “ ” or “ ” button can be used, and to
select the other letters, “ ” or “ ” button can be used.
After changing the name, press the
RED button to store the
new name or press the BLUE button to cancel.
INSERT:
When the GREEN button ( INSERT ) is pressed, “ NAME ”,
“ AUTOSTORE ” and “ DELETE ” functions are erased and the
selected programme is displayed with green characters. Use
the navigation buttons to select another programme’s posi-
tion. When the GREEN button is pressed again, the first se-
lected programme will be inserted into the position of the cur-
rent selection.
Press the
BLUE button to cancel the activated “ INSERT ” pro-
cess.
DELETE:
Press the YELLOW button to select a programme that you
want to delete. When the YELLOW button is pressed again
the selected programme will be deleted.
Pressing the
BLUE button cancels the activated “ DELETE ”
process.
AUTOSTORE:
(A.P.S. (Automatic Programming System))
A.P.S.
searches and sorts all channels and stores them auto-
matically on your TV, according to the transmission of pro-
gramme systems in your area.
To enter Autostore menu, press the
BLUE button.
C01-ENG&BG-AK49-C1100UK-2834-CLED-PLLCH-(AV-28RT4BU&SU)-10041581-5008xxxx.p65 14.06.2006, 11:43 9