1-14 (No.YA316)
HORIZONTAL
SHIFT
adjustment
Signal
generator
Remote
control unit
H-SHIFT
(1) Receive a circle pattern signal.
(2) Enter the SERVICE MODE.
(3) Press the [
RED
] key to enter the
H/V
adjustment
group.
(4) Select
H-SHIFT
.
(5) Adjust
H-SHIFT
to make
C=D
.
(6) Check and readjust
H-SHIFT
item if the adjustment
becomes improper after some other geometric
adjustments are done.
(7) Press the [
INFORMATION
] key to memorize the set
value.
HORIZONTAL
SIZE
adjustment
Signal
generator
Remote
control unit
H-SIZE
(1) Receive a crosshatch signal.
(2) Enter the SERVICE MENU.
(3) Press the [
RED
] key to enter the
H/V
adjustment
group.
(4) Select
H-SIZE
.
(5) Adjust
H-SIZE
until no white bars on both the left and
right sides of the crosshatch will be visible nor
screen will be so wide.
(6) Check and readjust
H-SIZE
item if the adjustment
becomes improper after some other geometric
adjustments are done.
(7) Press the [
INFORMATION
] key to memorize the set
value.
ANGLE
adjustment
Signal
generator
Remote
control unit
ANGLE
(1) Receive a crosshatch signal.
(2) Enter the SERVICE MODE.
(3) Press the [
RED
] key to enter the
H/V
adjustment
group.
(4) Select
ANGLE
.
(5) Adjust
ANGLE
until the vertical lines of the
crossatch pattern become straight.
(6) Check and readjust
ANGLE
item if the adjustment
becomes improper after some other geometric
adjustments are done.
(7) Press the [
INFORMATION
] key to memorize the set
value.
Item
Measuring
instrument
Test point
Adjustment part
Description
C
D
Screen size
Very
close
Very
close
Picture size 100%
