JVC AV-28ED5BN, AV-28ED5SN, Инструкция по эксплуатации

Страница: 10 / 17

ENGLISH - 25 -
In an AV mode, you can change only the “ MODE ” or “ CO-
LOUR SYSTEM ” setting.
• If you want to modify the current settings of a channel, se-
lect the channel of which you want to modify the setting.
Then display the main menu on the screen.
• Press “ “ or “ ” button to select “ TUNING ” item.
• Press “ ” or “ ” button to enter “ TUNING ” menu.
3URJUDPPH
6HDUFK
6WDQGDUG
&RORXUV\VWHP
%DQG
781,1*&
1. Press “ “ or “ ” to select an item in the “ TUNING ”
menu. Then press “ ” or “ ” button to change the setting.
2. After all settings of a channel are completed, press “ “
or “ ” button to select “ Programme ” item. Then press
“ ” or “ ” button to select a programme number which you
want to store the setting.
3. Press “ “ or “ ” button to select “ Store ” item. Then
press “ ” or “ ” button to store the setting.
The "
STORED " appears at the bottom of the menu for 3
seconds. Then T-V LINK menu appears.
'RZQORDG79 9&5)HDWXUH
& RQWLQXH
3,& &DQFHO
79/LQN
4. If you do not have a T-V LINK compatible VCR , press
“ PICTURE ” button to exit the menu.
If you have a T-V LINK compatible VCR connected to the
EXT.2 terminal, follow the operating procedure “ Down-
loading the data to VCR ” on page 21 to transmit the
Programme table data to the VCR.
Search:
You can search a channel manually.
• Select "
Search " item. Then press “ ” or “ ” button to start
searching. " SEARCHING " is displayed while the TV is
searching a channel.
• Searching stops when the TV finds a channel. Then the
channel is displayed.
• Press “ ” or “ ” button repeatedly until the channel you want
appears.
• When you cannot search a channel you want, select the
" Standard " item and select other broadcasting system.
Then start searching again.
Standard:
• If you cannot hear the normal sound even when the picture
appears normally, select the correct broadcasting system to
hear the sound normally.
• Select " Standard " item. Then press “ ” or “ ” button to se-
lect a broadcasting system.
Colour system:
• If the picture is not clear or no colour appears, select the
correct colour system to display the picture normally.
• Select " Colour system " item. Then press “ ” or “ ” button
to select a colour system.
Band, Channel:
• If you know a channel number, you can find it directly by
entering the channel number.
• Select the " Band " item. Then press “ ” or “ ” button to se-
lect the band ( C or S ) where the channel you want is lo-
cated.
• Select the “ Channel ” item. Then press “ ” or “ ” button to
select the channel number, or enter the channel number
with the digit buttons. The available channel numbers differ
depending on your “ COUNTRY ” and “ Standard ” settings.
Fine tuning:
If the channel reception is poor, fine-tune the channel.
• Select "
Fine tuning " item. Then press “ ” or “ ” button to
fine -tune the channel.
Name:
You can store the channel name or change it.
• Select “
Name ” item. Then press “ ” or “ ” button to display
a cursor.
• Press “ ” or “ ” button to select a character and
press “ ” or “ ” button to move the cursor.
• After the name is completed, press the MENU button.
Mode:
Set " Mode " item to " TV " for the TV channels.
• When you watch a picture from your VCR and the picture is
unstable, you may improve it by changing the " Mode " set-
ting from " TV " to " VCR ".
Decoder (EXT-2):
You can only set “ Decoder (EXT-2) ” item to “ ON ” if you have
a decoder connected to a T-V LINK compatible VCR, which
02-ENG-2835-AK52-3D-C86SUK-4-3-(AV-28ED5BN&SN)-50064523.p65 20.04.2005, 10:04 25