• Before you can operate the remote control, you must first install
the batteries (included). See “Changing the Batteries” at the
bottom of this page for instructions.
• Press the P
OWER
button to turn the television on or off.
• Press the CH+ and CH- buttons to scan through the channels.
Tap the CH+ or CH- button to move through the channels one
channel at a time.
• To move rapidly through the channels using JVC’s Hyperscan
feature, press and hold CH+ or CH-. The channels will zip by
at a rate of five channels per second.
• Press V
OL
+ or V
OL
- to raise or lower the volume. An indicator
bar will appear onscreen to show you the television volume
level.
• The CH+/- and V
OL
+/- buttons are also used to navigate JVC’s
onscreen menu system.
• You can directly access specific channels using the 10-key
pad.
• For more information on remote control button features, see
pages 26 to 28.
Note: You can operate the basic functions of any JVC Brand
VCR unit. Operational features include: Power On and Off, Play,
Stop, Pause, Rewind, Fast Forward, Channel up and down and
Record.
Changing the Batteries
Raise the latch on the remote’s back cover to remove it.
Insert two AA batteries (supplied), carefully noting the "+" and "-" markings on the batteries and on
the remote control. To avoid a potential short circuit, insert the "-" end first. Be sure to use only size
AA batteries.
When batteries are installed, snap the cover back into place (until it clicks into position).
• If the remote control acts erratically, replace the batteries. Typical battery life is six months to one
year. We recommend using alkaline batteries for longer battery life.
POWER
DISPLAY
INPUT
1
7
4
100+
3
9
6
MUTING
MENU
V CHIP
EXIT
2
8
0
5
+
CH
VOL
VOL
+
CH
CHANNEL
VCR CONTROL
POWER TV/VCR
REC
STOP
PAUSE
PLAY
FF
REW
SLEEP
TIMER
VIDEO
STATUS
RM-C205
RM-C205
(optional)
Remote Control Basics
Remote Control
15
Hotel IB 6/28/2001 10:13 AM Page 15
