JVC AV 27D305, Руководство пользователя

Страница: 31 / 48

Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes pre-
set with a lock code of “0000”. You may change the code to any four-digit number you wish. To
change the lock code, follow the steps below.
Press the M
ENU
button
π†
To SET LOCK CODE
è
To operate (lock icon appears)
Press Z
ERO
to access the lock code
The first digit will be highlighted
è
To select the number
π†
To move to the next digit
Continue to follow these directions for all four numbers
π†
To FINISH
è
To save settings and exit
(your lock code is now set)
Press the E
XIT
button when finished
• After a power interruption you must reset the lock code.
• Write your lock code number down and keep it hidden from potential viewers.
• If you forget the lock code, a new code may be set using the steps listed above.
Notes:
When a viewer attempts to watch a blocked channel, this message appears:
The channel will remain blocked until the correct lock code is entered (see above for information
on setting your lock code).
Initial Setup
31
Set Lock Code
� � � � � � � � � � � �
�
� � � � � � � � � � �
� � � � � �
� � � � � � � �
� � � � � � � � � � � � � � �
� � � �
� � � � � � � � � � � �
���� ����������� �������
���� ������ �������
������ ����� ���� ���� ��
�� ��� ��� �� ������ ���
��� � � � �
AV-27\32D305 English 1/21/04, 9:38 AM 31