JVC AV-21MS30, Руководство по обслуживанию

Страница: 18 / 45

(No.YA328)1-19
SUB BRIGHT
adjustment Remote
control unit [2. V/C]
4. BRIGHT Notes:
• Proceed to the following adjustment after having
completed the WHITE BALANCE (Low light) and
WHITE BALANCE (High light) adjustment.
• Set PICTURE MODE (VSM) to "BRIGHT".
(1) Receive a PAL broadcast.
(2) Select
2. V/C from the SERVICE MENU.
(3) Select 4. BRIGHT .
(4) Set the initial setting value.
(5) If the brightness is not best with the initial setting value,
make fine adjustment until you get the best brightness.
(6) Press the [DISPLAY] key twice to return to the
normal screen.
SUB
CONTRAST
adjustment Remote
control unit [2. V/C]
5. CONT Notes:
• Proceed to the following adjustment after having
completed the SUB BRIGHT adjustment.
• Set PICTURE MODE (VSM) to "BRIGHT".
(1) Receive a PAL broadcast.
(2) Select
2. V/C from the SERVICE MENU.
(3) Select 5. CONT .
(4) Set the initial setting value.
(5) If the contrast is not best with the initial setting value,
make fine adjustment until you get the best contrast.
(6) Press the [DISPLAY] key twice to return to the
normal screen.
SUB COLOUR 1
adjustment Remote
control unit [2. V/C]
6. COLOUR [Method of adjustment without measuring instrument]
Notes:
• Proceed to the following adjustment after having
completed the SUB CONTRAST adjustment.
• Set PICTURE MODE (VSM) to "BRIGHT".
- PAL COLOUR -
(1) Receive a PAL broadcast.
(2) Select 2. V/C from the SERVICE MENU.
(3) Select 6. COLOUR .
(4) Set the initial setting value for PAL COLOUR.
(5) If the colour is not best with the initial setting value,
adjust until you get the best colour.
(6) Press the [DISPLAY] key twice to return to the
normal screen.
- SECAM COLOUR -
(1) Receive a SECAM broadcast.
(2) Press the [COLOUR SYSTEM] key to select the
SECAM colour system.
(3) Adjust SECAM COLOUR in the same way as for
"PAL COLOUR".
- NTSC 3.58 COLOUR -
(1) Receive a NTSC 3.58MHz broadcast.
(2) Press the [COLOUR SYSTEM] key to select the
NTSC 3.58 colour system.
(3) Adjust NTSC 3.58 COLOUR in the same way as for
"PAL COLOUR".
- NTSC 4.43 COLOUR -
When adjustment is done for NTSC 3.58 COLOUR,
appropriate values are automatically set for NTSC 4.43
COLOUR.
Item
Measuring
instrument
Test point Adjustment part Description